RAK | Creation Cassel

New script – Ribbon Tag Flower

February 26, 2017November 11, 2011 by Cassel

What do you do with your ribbons? Did you ever think of cutting some random pieces and place them into a flower shape? This is a fun twist to using ribbons, but it can be a bit tedious. That is, if you do it all manually. This new script for Paintshop Pro will let you create such a flower in less than one minute. This is a perfect tool to create an additional element for your kit, or to embellish your layout. Use ANY ribbon you have on hand, of any size, in any number. The script will randomly choose one ribbon at the time, and trim a piece of a random length and shape. Each flower can have a different number of pieces too. Basically, you can run this script hundreds of times and always get a different result.

The script will also allow you to add shadows to all the pieces if you want, and with the settings you want. And if you want even more choices, the script will give you the option to keep creating new flowers with the same ribbons, over and over again. Create 1 flower, or 10, or 50. Finish with your choice of fastener: staples, buttons, paperclips, stitching, etc.

You can get this fun script in either of my store: Creation Cassel .

cass-RibbonTagFlower-Sampler1 But i am sure you would like to have this script for free, right? You have this option if you add your name to this thread in the DST forum. I will be back on Monday with a winner.

As usual, i will also give you the option to download a sample of what this script can do. In fact, i will give you the option to grab more than one sampler.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

This flower is fairly small, as it is about 500 pixels in size.

But here is the novelty: there is a second download available for you, which includes 3 full size ribbon flowers. They are much larger so you can adjust the size to fit your need. However, this one has a little twist to it: you have to pay with a tweet or a Facebook post to get it. Not too demanding? Check it out here:

News from the Campus

Did you register for the Webinar for last week? Did you miss it? I know in our area, we had to turn the clocks back one hour to go from Daylight Saving time to Normal time, and that seemed to have affected several participants who might or might not have the time change. After several requests and inquiries from registrants who missed it, i decided to present the webinar a second time, and this will be held this Saturday (yes, tomorrow). It will also be held at a different time to allow our Aussie friends to join (last time, they were likely all asleep). So, don’t delay. See what you will be able to do afterward.

Original photo from Bernice

New script – Folded Ribbon #5

August 4, 2018October 28, 2011 by Cassel

Straight ribbons can be useful, but also boring. This script will turn just about any straight ribbon into a dynamic folded one. Whether you are using your own ribbon, or let the script create one, you can get pretty creative in what you will be using. In fact, you can use a plain ribbon but also a translucent one, a lace one, a patterned one, even one with directional designs like text. The script will pick the right segments to put end to end for a realistic “continuity” of the pattern.

The end result will be about 3600 pixels long so it will cover most of the width of your layout. And the layers will be left unmerged (but linked so you can move it around). You can then insert various trinkets if you want.

You can get this script in my store: CreationCassel .

And why not add your name to this thread in the DST forum Happy Place for a chance to win this script on Monday night. Just give me ideas of how you might be using this script. Be creative. I LOVE to read your suggestions.

cass-FoldedRibbon5-samples And for a closer look at the result of this script, i created 2 ribbons from scratch (so they are 100% original) and ran the script on them. You get both the straight version and the folded version of both. That means you can use them separately, together or even run another script on the straight ribbon. Remember that there are many other scripts in the store that could be used with a straight ribbon of yours!

You need to be logged in to download this sample. You can either login, or register on the top of this page.

News from the Campus

“Be the master of time”. If you have not yet registered for the webinar planned for Nov 6th, you still have a week to do so. If there are too many registrations, i might consider making a second live presentation. That means that you might be able to attend at another time, live, and ask questions during the presentation. Also, if i present the webinar a second time, i would be using different photos. Do you have photos you would like me to use? Send them to me! Landscape images will be better for the season change, but to change the time of day, just about any image would probably do. So, remember, you need to register for me to know how many of you are interested!

If you are a registered member of the Element Creation Tutorials section, did you notice the newest tutorial posted last week? A quick and easy one, but still very useful in layouts or kits.

DSD is coming. Did you know that there will be a special promotion in the Campus? If you have been considering registering and thought you were a bit tight on money, you will want to keep a close eye on it. Do you have a friend who might be interested in registering to EITHER one of the courses? You might want to get in touch with that friend soon. The promotion will only last a few days. Don’t miss it. If you want to make certain you get the news in time, just add your name to our mailing list.

Subscribe here

There are a few more advantages to be on the mailing list:

- you will automatically get a FREE ebook on how you can turn your “blah” photos into WOW photos, in 30 seconds or less

- you will get some EXCLUSIVE goodies too. Those goodies were actually suggested by the current members of the list (and they didn’t realize it yet as it will be a real surprise, even for them!)

New script – Knot #6

September 1, 2018October 21, 2011 by Cassel

This week, you can get another knot script. Why another knot? Why not? You always have straight ribbons and would love to tie it to a tag, a frame or other decorative element. Now, if you have Paintshop Pro, and a straight ribbon, you might just be able to tie it into a realistic knot with shading. If you don’t have a ribbon to use, the script will create one for you. Unlike other knot/ribbon script, this one will actually have and accurate use of the length of the ribbon, so you can use a directional design, text, or gradient and have the knot look right. You can use opaque or translucent ribbon because the way the pieces are cut and shaped, they follow the actual path of a “normal” ribbon.

Not only you get a fun knot, but all the layers are left unmerged so you can insert elements between the layers or even inside the knot.

If you want the script to create the ribbon for you, you will end up with a 4200 pixels ribbon that you can use separately or to run another script on. For an interesting effect, choose a gradient or even a solid color with a texture (that will give you kind of a see-through ribbon!).

This script is available in my store: Creation Cassel .

cass-Knot6-sample And how about a chance to “tie the knot” for free? Everyone loves free stuff and i am sure you would love to get this script for free. Then, hop over to the DigishopTalk forum in this Knot script thread and give some ideas on how this script can be used. I will draw for a winner on Monday night. And remember, if you buy this script to take advantage of the sales price, you can still enter and if you win, you simply get a coupon for a future new release!

I am sure you want to see this knot up close so i made these two knots available for you. So in this samplers, i am including two straight ribbons and two knots made with them. The knots are in PSD format with unmerged layers so just about anyone can use them.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

News from the Campus

Did you see the tutorials that were added in the last few weeks in the Element Creation Tutorials section of the Campus? Here is a peak!

There are more but it would take up too much room in here. If you want to register to that section of the Campus, you can see more about theElement Creation Tutorials.

The PSPX4 special is still in effect, but hurry; I don’t know how long it will still be available! Get PSPX4 FULL version, downloadable or boxed for $39.99. This is a HUGE deal as it is 50% of the regular price. Hurry and grab it while you can.

Get PSPX4 for $39.99

And how about the Webinar on “Be the Master of Time”? You will see how to turn a summer photo into a fall or winter photo using only the tools and features of your Paintshop Pro. You will also see how to turn a daytime photo into a night time one, again, using only Paintshop Pro. It will be held on November 6th, at 3pm Eastern. Will you be there? Click the yellow button to register for it and you will get reminders ahead of time in case you forget!

If you are interested in attending, you can send me a couple of summer or daytime photos. I might use them to demonstrate the technique.

New script – Colored Edge

August 4, 2018October 14, 2011 by Cassel

In just a couple of clicks in your Paintshop Pro, you can add a colored and textured edge to ANY shape, of ANY size and you choose the color and the width of the border. Whether you want to add a colored edge to an alpha, a preset shape, or even a cut up photo, this script will make it a breeze.

The script will create TWO colored edge layers and leave them unmerged. Once the script is finished, you can merge the layers, or play with the opacity, the blend mode or simply separate them to use only the edges without the base shape. Perfect to add a little detail directly onto a photo, or on your background paper to include some journaling.

You can get this script in my store: CreationCassel

If you want a chance to win this script for free, just go add your name to this thread in the DST forum, and tell me what you can think you could use this script for. I will be back on Monday night to announce a winner.

cass-ColoredEdge-Digits I know, you also want to have a peek at the result of this script by downloading a free sample, right? Well, I cannot disappoint you, can I? So here is your sampler. It is a set of digits in greyscale, layered in PSD format. You can easily recolor each layer separately, merge them or use them separately too. This set is CU.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

News from the Campus

The PSPX4 special is still in effect, but hurry as it is only until Sunday, Oct 16th! Get PSPX4 FULL version, downloadable or boxed for $39.99. This is a HUGE deal as it is 50% of the regular price. Hurry and grab it while you can.

Get PSPX4 for $39.99

(although i am an affiliate for Corel, this special is NOT through my affiliate link)

Did you have a look at the Webinar on Shadows? It is available for viewing for free. We showed tips for flat shadows, lifted shadows, cluster shadows and fantasy shadows. See what Carolyn said about the Webinar on shadows:

Cassel,
Thanks so much for posting your webinar on shadows in PSP. I learned a whole lot! I know that this will help my layouts as well as the presentation of my kits. Thanks!
I look forward to future webinars Unfortunately, I won't be able to join them live if they are held on Sundays. However, I can still learn from them by viewing them online. Thanks again for these great resources!!
Carolyn S. Ritter

So what are you waiting for? There are 2 webinars available already. They are FREE. Check Webinar on Shadows And while you are there, you might as well register for NEXT Webinar. It will be on changing photos from day to evening/night and from summer to autumn/winter. Just like magic! And you can use ANY version of PSP.

Finally, The Basic Scrap Course with PSP is still on special and registration at the special price, with the special bonuses will only be until Sunday, October 16th. The registration will give you access to 12 units, 36 lessons, 45 video tutorials, with matching handouts you can download. And all that for unlimited access. Your registration will not run out after 6 months. It will not run out after you view all the videos. You can keep referring to them forever, with NO additional fee. Registration this weekend will give you a coupon for $5 from Mariscrap, 26 layered templates, 50 sketches, and a chance to win a copy of the DVD Slideshow Builder Pro to create fantastic slideshows with your photos or layouts. Perfect to prepare Holiday presents ahead of time!

Register Now for the Basic Scrap Course with PSP

New Tubes – Chain beads

February 26, 2017October 7, 2011 by Cassel

How about some metal beads to create necklaces, bracelets, frames, or any other element you can think of using “ball chain”look? You can now do it with those great Paintshop Pro Picture tubes. These sets of beads are not going to make a boring row of totally identical beads, but they incorporate some slight differences in the beads so it looks more realistic. You have some gold beads, silver beads, brass beads, and more. You can place them one by one by simply clicking here and there and everywhere. You can “draw” with them as they will follow your mouse movement as if you were drawing a line. Or you can also place them evenly along a vector path you could have drawn with your favorite tool. Use the Pen tool to create a base “thread”, and then use the Vector Tube script to place the beads along that path, for a great free flowing chain look.

Use the default settings, or change the size or the step for a different and custom look.

You can get these tubes in my store : Creation Cassel.

And how about a chance to win them all? Check this thread in the DST forum. Tell me what is your favourite set of beads and you might with them all.

cass-ChainBeads1-samples

Time for a nice little freebie. I created those chains for you to incorporate into your layouts. There are 2 long chains and 2 small ones. The small ones can easily be used to attach a tag or other elements. They are in PNG format, so they should be useable in most graphic program.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

News from the Campus

Last week, we had a webinar on using shadows. The most fun part was to show how to use layered shadows in clusters to make a fantastic end result. Most participants commented on that technique that was new to them. The webinar was recorded and should be available soon (hopefully this weekend), in the Webinar section of the Campus. It will be accessible to all registered members of the Campus (registration is free). The next Webinar will be organized this weekend, so you keep an eye on that page.

Did you want to register for the Basic Scrap Course? Did you postpone that decision? You might want to keep a close watch on the Campus as there will be another promotion coming up soon. You might want to join our many other members in the classroom. I can see several members having a blast with what they learn with the tutorials.

Big special for Paintshop Pro X4

Corel is having a big promotion for a limited time only. You can get a FULL version of PSPX4 for $39.99. We are not talking only update, but a complete version (the update is the same price too). This promotion is only until October 16. And if you have an old version of PSP, there is NO NEED to upgrade since you can run both versions side by side; you can get the newest tools and features, and still use the interface you are used to. And yes, you can have multiple versions installed on the same machine: i have versions 8, 9, X, X1, X2, X3 and X4 installed at the same time (occasionally, i even RUN 2 or 3 simultaneously when i am testing scripts).

Get PSPX4 for $39.99

(although i am an affiliate for Corel, this special is NOT through my affiliate link)

New script – Torn Apart

August 4, 2018September 30, 2011 by Cassel

Following the great success of the Torn Edge script, i thought it would be great to have the option to tear in the center of an image or a paper instead of only the edge and so this idea came up. This script for Paintshop Pro will create a rip in the middle of any image, photo or paper, of any size. You can leave the tear in the center or you can move it around, and even rotate it, especially if you want to place it in a strategic place of the image. The torn edges will be left on separate layers so you can add a texture if you want. The layers will be unmerged but linked to the matching torn edge.

You can tear a paper once, or more than once, providing that you either merge the piece and the tear together before running the script a second time, of by copying and pasting the paper piece (without the torn edge) as a new image.

Decide if you want a vertical or horizontal tear.Choose if you want it to be kind of straight, slightly uneven, or more. Many interesting effects can be achieved with this script, tearing photos, papers, or even paper pieces like note papers, heart shapes, etc. This could be a fun way to get some journaling pieces.

You can get this script in my stores: Creation Cassel and DigiScrapWarehouse.

And as usual, you have a chance to win this script by adding your name to the RAK thread in the Happy Place. Unlike usually, the winner will be announced on TUESDAY night instead of Monday, since i will be out of town on Monday. Just tell me what you think you could use this script for.

cass-TornApart-sample And here is your free sample. This is a layered template in PSD format. It consists of 3 “paper” pieces that will match perfectly, and 4 “edge” pieces. You can adjust the “edge” pieces to match any paper color, and the “paper” pieces are just like a puzzle and you can cut out your paper or photo using the magic wand. The “paper” piece layers are linked to the matching “edge” piece layers so you can move them around together, however, to help you with the “photo” part, all the “edge” pieces are below the “paper” pieces so you will have to rearrange the layers order when you decide to merge them.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

News from the Campus

Not too much new YET, but i am working to bring you some super interesting bonus for the next registration period for the Basic Scrap Campus. So keep a close eye. This promotion will not last very long so you might want to register to the mailing list so you stay informed as soon as the registration re-open. The current students seem to really enjoy the lessons as i have seen some samples of their work. Seeing those, i am sure they are having a blast!

This weekend, we’ll have the FREE webinar on shadows in digital scrapbooking using Paintshop Pro. We’ll look at the regular basic shadows on a flat surface, shadows to make those ribbons look all curled up, shadows for your clusters, and then, shadows for the fantasy layouts.

Register here

If you don’t register and decide to join Sunday, October 2nd, as it will be starting at 3pm Eastern, you can click HERE.

See you around!

New script – Template User Tool

September 18, 2021September 23, 2011 by Cassel

Once you created some fun templates with the Cluster Template Maker script, now you want to fill in all those shapes, either with papers or with photos. This can be a pretty tedious task of copying, pasting, adjusting, resizing, changing layer, selecting, deleting excess paper, deleting original layers, renaming layer. Now, this script will help you use any template even faster with your Paintshop Pro. This script will take care of those tedious tasks that are repeated layer after layer after layer. You will simply have to pick the paper or photo you want to use on each layer, resize, rotate, adjust them to fit the shape and the script will do the rest. How cool is that?

You can get this script in my stores now: Creation Cassel and DigiScrapWarehouse.

If you want a chance to win it (even if you already purchased it), you can simply add your name to this thread in the Happy Place of the DST forum. I will be back Monday night to announce a winner.

cass-ClusterTemplate-02 As usual, i have a free sample for you. Since this script is a tool to use with your own templates, i could not run it and give you the end result, but i could run the script from last week, and let you have another clustered template in PSD format.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

News from the Campus

The registrations for the Element Creation tutorials section are still going but the deadline for the super duper bonus draw was last Sunday. The winners are:

Sue Turner: Paintshop Pro X4 Ultimate

Dianne Parham : $10 coupon the Scrapping Wright’s store

In addition, there was one draw in the Happy Place at DST and the winner was Limequilla. Let’s hope you all enjoy your treats. If you are a registered student to the Element Creation Tutorials section, remember to send me the suggestions for the next tutorials you would want to see.

Did you attend our Webinar 2 weeks ago about the Text tool in Paintshop Pro? If you did not, you can view the annotated recording, and download a handout in the Webinar section of the Campus. It is free to access but you have to be a registered member of the Campus (and the registration is free so there is absolutely no cost to you). If you are interested in attending the next Webinar, it will be held on October 2nd and will be about Shadows. You can register to the webinar now, and get reminders ahead of time, in case you are like me and tend to forget your “appointments” easily. Again, it is free to attend, so come on over and see me work live, directly from the comfort of your own home.

Register Now

If you have considered joining a course at the Campus, stay tuned for any upcoming promotion. Make sure you check your emails and obviously, have your name on my mailing list otherwise you will miss anything big!

Subscribe to Mailing List

New script – Cluster Template Maker

September 1, 2018September 15, 2011 by Cassel

Some people love to create clusters, but feel they just can’t make anything reasonable. Someone asked me if i could make a script to do clusters for her. Well, I know for sure that a script in Paintshop Pro is a set of commands with mathematical values, so there is no way i can code what looks good and what does not, so i studied some clusters that looked good and tried to extract some mathematical similarities and that is what got into this script. It turned out to be quite good and the results are generally interesting.

The script will generate a random number of rectangles, horizontally and vertically, of different size and shape, all layered under an image or a placeholder. Once in a while, you will see a wavy line in the cluster. That is just added for fun. Once the script is done, if you REALLY don’t like the result, simply undo and run the script again. It is that easy. Once you are kind of happy with the result, you can still adjust and customize the layers, and the rectangles. Add more shapes, remove some layers, rotate others, rearrange the layer order, add some fancy edges on some rectangles, etc. Make it your own. And if you want more layers, just run the script a second time starting with the image layer, then you’ll have more layers and shapes to play with!

You can grab that script in either of my stores: Creation Cassel and DigiScrapWarehouse.

And for a chance to win this script, simply add your name to this thread in the Happy Place of the DST forum, and tell me how you go about to create your clusters. I will be back on Monday with the name of a winner.

cass-ClusterTemplate-01 As usual, you want to get a freebie, right? Fair enough. I created this layered cluster template with the script. I added shadows to the preview only, since there is a chance you might want to change some layers and then, the shadows might not work. It is a PSD format, so most of you should be able to open it, and use it. If you DO use it, would you mind showing me how it turns out? I would love to see how different scrappers will turn this ONE template into many unique results.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

News from the Campus

The Element Creation Tutorials with Paintshop Pro section has open and we are taking registrations. If you register on or before September 17th, your name will be put into a draw to win one copy of Paintshop Pro X4 Ultimate (freshly released last week).

But you have only a couple of days left!

I added a thread in the DST forum where you can win ONE membership to the Element Creation tutorials, and the draw will be on Sunday morning, just in time for the winner to have his/her name added to the draw for the PSPX4. Would you be lucky enough to win both? Maybe. Who knows?

Sunday, Sept 11th, we held a webinar on using the Text tool in Paintshop Pro. An edited recording of this webinar is currently posted in the Scrapbook Campus under the Webinars tab. A written handout will be added shortly. (you only have to be logged in to access it, but registration is totally free if you are not yet a member)

Do you want to register to our next webinar? It will be held on Oct 2nd at 3pm Eastern. You can register here so you will be getting reminders ahead of time. The topic? Shadows!

New script – Shattered

September 1, 2018September 9, 2011 by Cassel

How long would it take you to cut an image in random pieces, separate them in individual layers, resize them, rotate them, move them and then add shadows to each of them? With your Paintshop Pro and this script, it will only take you a few seconds and a few clicks. And if you dont like the result, no problem; run the script again. You will NEVER get the same result twice because of the random features incorporated into the code.

You can stop the script right after the pieces are cut and separated in layers, or you can keep going and get each piece slightly resized, rotated and moved randomly.

You can stop the script here too, or choose to add a drop shadow. In this case, you will decide on all the settings for the shadow and the script will apply the exact same settings on all the pieces, no matter how many there are. Since the script ends with unmerged layers, you can keep manipulating all the pieces as you wish, deleting some, moving others, etc.

You can get this script in either of my stores: Creation Cassel or DigiScrapWarehouse.

cass-Shattered-sample How about a chance to win this script for free? You can, by simply adding your name to this thread in the DST Forum, telling me of one creative use you can think of for this script, and Monday, i will announce a winner.

And now, as usual, you are expecting a freebie, right? Well, since this script applies on a photos, i could hardly give you a cut up picture. I am sure you would not care to get one of MY pictures! So, i figured i could make a layered template with the pieces still in place, not resized, rotated or moved. That way, you can apply that template to any picture of YOURS and create a similar effect.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

Paintshop Pro X4 is out.

Paintshop Pro X4 came out Wednesday this week. I have been part of the beta testing team for a few months. If you want to know about the improvements or additions, and if it is not too late for you, you can join their live demonstration tonight (there is one left, and you can register here). One thing i can say is that it is more stable than X3 was, so it might interest you!

News about the Campus

Did you add your suggestions for which type of elements you would like to learn to create yourself? If not, it is still time. Just hop over to this page and add your name and suggestion. And then, be sure to check your emails or check the Campus again very soon as the Element Creation Tutorials section should go live within a few days. And you will have a chance for some GREAT bonuses. And i mean GRRRRREAT. Subscribe to the mailing list on that page, follow us on Twitter, or like us on Facebook to be sure you know when the section goes live because you dont want to miss the time limited bonuses!

See you around the Campus.

New script – Waterwork

September 5, 2020September 2, 2011 by Cassel

How about some fresh water added onto your layout? This script will convert the text or design of your choice into clear water, complete with shine and refraction from the bottom surface.

You can get the script to use smaller droplets to fill in the design, or use the shape as is. Use any color if you want to simulate juice drops!

Exceptionally, this script will only work with PaintShop Pro 9 and up (sorry for PSP8 users).

All the designs will be slightly distorted, so straight lines wont stay perfectly straight, and corners will be rounded off. Use the simple round brush and hand write or hand draw something. Draw random blobs to create droplets, or draw letters in an uneven manner for best result.

You can get this script in my stores: CreationCassel and DigiScrapWarehouse.

And how about winning this script? Check out this thread in the DST Happy Place. Simply give me ONE splashy word you can think of and add your name.

cass-Wet-Digits As usual, i have a little freebie for you. This is a set of wet digits on a tag. Each tag was made using handwritten digits run through the script. You get all 10 digits and one blank tag for you to add your own.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

Each tag is pretty large so you can resize it as you need.

News from the Campus

Did you follow the newsletter from the Campus? Did you know that the second section should be released soon? Yes, the second section is all about creating elements yourself instead of solely relying on purchased supplies. You would then be able to either create your own elements yourself, from scratch with the shapes and colors you need, or you can learn to modify the elements you already have and personalize them to fit the layout you want to create. This should be open to registration soon. If you want to be among the first ones to register, you can add your name to this mailing list, and tell me which type of element/technique you want to learn about first. I have dozens and dozens of tutorials planned, but which ones will i release first? You tell me what YOU want! If you dont want to add your name to a list, you can just email me or even add a comment below. I will see it all.

Remember to keep an eye on the Campus and your emails as there will be some time limited special offers so, watch out.

Although most of you might be scrappers, i am sure you can find other uses for your scrapbooking supplies. Whether it is invitation cards, wishing cards, calendars, and more. Check out the article here.