Sample | Creation Cassel

New script – Shattered

September 1, 2018September 9, 2011 by Cassel

How long would it take you to cut an image in random pieces, separate them in individual layers, resize them, rotate them, move them and then add shadows to each of them? With your Paintshop Pro and this script, it will only take you a few seconds and a few clicks. And if you dont like the result, no problem; run the script again. You will NEVER get the same result twice because of the random features incorporated into the code.

You can stop the script right after the pieces are cut and separated in layers, or you can keep going and get each piece slightly resized, rotated and moved randomly.

You can stop the script here too, or choose to add a drop shadow. In this case, you will decide on all the settings for the shadow and the script will apply the exact same settings on all the pieces, no matter how many there are. Since the script ends with unmerged layers, you can keep manipulating all the pieces as you wish, deleting some, moving others, etc.

You can get this script in either of my stores: Creation Cassel or DigiScrapWarehouse.

cass-Shattered-sample How about a chance to win this script for free? You can, by simply adding your name to this thread in the DST Forum, telling me of one creative use you can think of for this script, and Monday, i will announce a winner.

And now, as usual, you are expecting a freebie, right? Well, since this script applies on a photos, i could hardly give you a cut up picture. I am sure you would not care to get one of MY pictures! So, i figured i could make a layered template with the pieces still in place, not resized, rotated or moved. That way, you can apply that template to any picture of YOURS and create a similar effect.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

Paintshop Pro X4 is out.

Paintshop Pro X4 came out Wednesday this week. I have been part of the beta testing team for a few months. If you want to know about the improvements or additions, and if it is not too late for you, you can join their live demonstration tonight (there is one left, and you can register here). One thing i can say is that it is more stable than X3 was, so it might interest you!

News about the Campus

Did you add your suggestions for which type of elements you would like to learn to create yourself? If not, it is still time. Just hop over to this page and add your name and suggestion. And then, be sure to check your emails or check the Campus again very soon as the Element Creation Tutorials section should go live within a few days. And you will have a chance for some GREAT bonuses. And i mean GRRRRREAT. Subscribe to the mailing list on that page, follow us on Twitter, or like us on Facebook to be sure you know when the section goes live because you dont want to miss the time limited bonuses!

See you around the Campus.

New Script – FLower Power

August 4, 2018August 26, 2011 by Cassel

This little script for Paintshop Pro might not seem like much but how often did you want to get a flower shape and had to do all the duplicating and rotating manually? This script will do just that for you. With a random feature integrated, you might get between 6 and 15 petals, and each petal will be slightly different in size and shape, so you will always get a new shape.

In addition to creating a different shape, you can generate it as a vector shape to be exported as a custom shape, so you can use it at any time, later on. You can choose to have it in layered raster with your choice of color, gradient or pattern, or you can ask for a plain basic flat sample, again in the color of your choice (perfect for layering).

Once the script is run, you can keep adding details, modify the individual petals, add glitters on the edge, re-arrange the petal order, remove one petal, etc. So many things you could do!

You can get this script in my stores: CreationCassel and DigiScrapWarehouse.

If you want a chance to win this script, simply go over to the DST forum, and add your name to this thread. I will be back on Monday with the name of a winner.

cass-FlowerPower-sample I am sure you are also looking for a freebie sample for this script. That is exactly what i did. I ran the script and got a few random shapes and i played with them. On one layered shape, i added a glittered edge with the Glittered Edge script on each individual petal, then i slipped the last petal under the first one for the gold color flower. Then, i played with the Felt script to add a felt texture on 3 coloured copies of the same flower, and layered them. You get one PNG sample and the matching PSD format flower. Finally, i ran the Inked Edge script on a purple flower, petal by petal, and then, i removed the petals themselves, leaving only the inked border. I think it does give a really fun result that i didn’t even expect! What can you do with that script?

You want to play with those? You need to be logged in to download this sample. You can either login, or register on the top of this page.

For the fun of it, this week i took the time to create a scrap page about one day of geogaching with my husband. It was a fun day, and since i have been meaning to make a whole album on our geocaching adventures, which started 3 years ago with my sons, i think i just found a style that might work for this. What do you think? I might just post the other pages as i create them. Do you do geocaching? Tell me about it!

From the Campus:

This is getting more and more exciting. Several people emailed me saying they would like to learn how to create this and that element with their Paintshop Pro, and i kept smiling because that is exactly what i am preparing! Many tutorials are in the making to create papers, elements, textures, fasteners, text effects, and more. So keep an eye on the Element Creation Tutorials of the Campus, subscribe to the mailing list if you want to be first to learn when registrations open so you can take advantage of the special price.

New script – Quick tiles

February 26, 2017July 22, 2011 by Cassel

Do you sometimes run out of ideas to create patterned papers? This script will help you pass that designer’s block. Open any photo, image or colored doodle, and run the script. You can generate up to 25 tiles in one run. Every run will give you a different set of tiles as there are several random functions integrated: a random area will be picked in the image, random settings to create the pattern, and random settings for the seamless feature if you choose it.

This tool will help Paintshop Pro users create a ton of interesting patterns, very quickly. In fact, you can get those 25 tiles in less than one minute! With all those tiles generated, keep the ones you like, delete the others. If you dont have enough, run the script again. Simple!

Due to a technical glitch, the script is not yet available in the stores, but it will be soon. I will update this post as soon as the script is available.

cass-QuickTiles-samples Although it is not available for purchase, it is available to win! Check out this thread in the DST forum and simply go add your name to it with a comment about the script. Just that. No hoops to jump through, no long math problem. Just add a comment. I will be back on Monday with the name of a winner.

As for a sample, this week, i am giving you 10 tiles that were generated from the photo in the script preview. Use those tiles to create your own papers. Adjust the scale and the angle to get different effects. Add a texture, an overlay, etc. What will you do with them? Show me your layouts!

You need to be logged in to download this sample. You can either login, or register on the top of this page.

New script – Woven Ribbon #1

August 4, 2018July 7, 2011 by Cassel

I had written a tutorial a few years ago on how to create a woven pattern in Paintshop Pro, without using any outside plugin. As i was looking at the steps, I challenged myself to find a way to do it with a script. Let’s remember that a script does not “see” the work and requires numbers for just about any command. Well, I am pleased to say I made it. This script will take any ribbon (you can also use lace, string, chain, braid, etc.) and make it into a simple woven pattern using four segments of the ribbon (so all segments are not exactly the same for a more realistic look).

The script will create a seamless tile that you can then use to floodfill any larger surface, and since you can vary the scale and the angle of the tile when you set the material.

Not only can you use the same exact ribbon four times, but you also have also the option to do some adjustments to each segment, like changing the brightness or colorizing. What can you weave? Just about anything that is kind of straight!

You can get this script in my stores: Creation Cassel and DigiScrapWarehouse. cass-WovenRibbon1-sample

And if you want a chance to win this script, check out this thread at the DST forum and just add your name to the thread.

How about a couple of samples to see what YOU can do with such seamless tiles. I created these two tiles using the script. The green one is using one ribbon from KimericKreations. The rope tile was made using a rope tube. What would you do with those?

You need to be logged in to download this sample. You can either login, or register on the top of this page.

How about the Campus? Did you hear about the big launch of theBasic Scrap Course with Paintshop Pro? It happened last Monday and there is a great promotion that will last until July 11th only. In addition to a special price, you will get YOUR CHOICE of products from three participating designers, 24 sketches to help jumpstart your inspiration, but also $10 coupon to my store, AND a chance to win a $25 coupon for Persnickety Prints. But the coupons for my store and the chance for Persnickety Prints are ONLY for those registering up to July 11th.

Not sure yet? Check out the first 9 lessons for free and the project tutorials in the Beginner Scrap section.

New Script – Quick Wrap

August 4, 2018May 20, 2011 by Cassel

Do you sometimes want to wrap an element with a ribbon for a dramatic look? To achieve that result, you probably do it the long way: cutting a piece of ribbon, copying, pasting, moving, rotating, trimming, shading and then, onto the next piece. If you want only a couple of pieces, it might be a reasonable process but if you want 10 pieces, or if you want to use 2 different ribbons, then, it can become very tedious. This script for Paintshop Pro, will go through that process in less than one minute for you.

With this script, you are not limited to use one kind of frame, or one kind of ribbon. You can use ANY element to be wrapped, be it a frame, a photo, a tag, and you can use ANY ribbon or lace you want, as long as it is the correct length for the script to run smoothly. Then, you can choose how many “wraps” you want (from 3 to 10), and you can also choose to add a shadow to each of the layers (remember, you might have a few there!), with your choice of settings. In the end, the result will be on separate, but linked layers.

So, what do you think of such a script? You can get this script in my stores: CreationCassel and DigiScrapWarehouse.

If you want a chance to win this script free, just add your name to this RAK thread in the DST forum and tell me what you would wrap with this script. I will pick a winner Monday night.

cass-QuickWrap-sample As usual, you surely want to have a closer look at what the script can do. So, as usual, i have a sampler for you. I created this wrapped frame from scratch. The ribbon uses a lace from Buzy Bee Scrap (i cannot find a valid link for her blog for now so if you have one, please, let me know). Not only the wraps were made using the Quick Wrap script, but i also added, manually, one piece made using the Knot #3 script.

The frame is a PNG format so just about anyone can use it. In addition, i am providing the straight ribbon so you can match it in your layout, or use it to make a bow or a knot or even to wrap other elements if you want!

You need to be logged in to download this sample. You can either login, or register on the top of this page.

REMINDER

Did you get a discount coupon from the April promotion i had in the store? Remember that this coupon is only valid in May 2011! You have just over a week left to use it! You better start shopping!

New Script – Palette Expander

August 4, 2018May 5, 2011 by Cassel

Do you sometimes have a color palette to work with but feel somewhat trapped by the given colors, wishing you had more options? Maybe you want some in-between colors that would still fit the palette, yet, be different enough to give some flexibility? This script will help you achieve this. All designers using Paintshop Pro will want this. If you have a starting palette of 5 colors, you will be able to expand your palette to add many many intermediate colors. Choose any 2 colors from the palette, and choose how many colors you want the script to generate (from 3 to 10), and just watch it go. It will take only seconds and you will now have a perfectly matched set of colors to create richly colored scrapbooking kits.

You can get this marvellous tool at my stores: Creation Cassel and DigiScrapWarehouse.

And if you want a chance to get this script free, add your name to the RAK thread here and i will come back Monday with a winner. Even if you decide to purchase it at sale price, you can still add your name and if you win, then you get a coupon for a future new release.

cass-WordAlbum-MOM Since this weekend is Mother’s Day at least in some countries (i am not sure about everywhere in the world), i thought it might be a fun to create either an album or even a multipage wishing card for your mom or any other mom you know who deserves well wishes. This album, created with the Word Album script. It is 6 inches high and just over 10 inches wide. You can resize it down if you want to use it only as a card. It is available in layered PSD format for use with most graphic programs.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

Now…. are you shopping a lot for this iNSD weekend? Still some energy? Want a surprise?

I will have a 40% sale on ALL MY PRODUCTS Sunday, May 8th. If you missed my Birthday sale, this is the perfect opportunity to catch up. You are VERY lucky there is a second sale in my store within such a short period of time, as it is a very rare occurence. So, hold on to your wishlist and come back Sunday, for 24 hours.

New Script – Cookie Cutter

August 4, 2018April 29, 2011 by Cassel

You know how cookie cutters are used to cut out cookies always in the same shape, of the same size out of cookie dough. This script for Paintshop Pro will do just about the same thing (without the dough). Unlike actual physical cookie cutters, you can use ANY SHAPE you want. You can use circles, rectangles, hearts, stars, arrows, spirals, ovals, frames, etc.

And more than choosing the shape, you can use any paper you have, colored or not, textured or not, big or small, from your stash or your kit. You can choose 1, 2, 10 papers, or how many your computer can handle open at once. The script will cut out the same shape, with some options of whether you want always the same size or slightly different, but it will cut from different sections of the papers every time. This means that even if you were to get 10 shapes from the same paper, the end result would be 10 different pieces. Isn’t this great?

Now, what can you do with so many little pieces of papers? You can create clusters, strings, mosaic, borders, patchworks, and probably more.

You can get this script in both of my stores: Creation Cassel and DigiScrapWarehouse.

cass-CookieCutter-sample And why not try to get it for free too? Check this thread in the DST forum, add your name and wait for Monday night.

I am sure you would love to see something made with this script. Initially, i was wondering what i could make as a sampler, since this is mostly at TOOL script and useable with your own papers, but i found some textures i scanned a while ago and used just as texture, so i used those “images”, colored them in red/pink shades and used a heart shape to run the Cookie Cutter script. Once done, i simply aligned the hearts, mirrored some of them and added some bead tubes i had. I think it looks cool, dont you? This string is 4000 pixels long so you can size it down a bit if you want.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

Do you want to see something else made with this script? Suzy, who was the one who suggested this idea made this layout using the kit Chatterbox from Sandra of Studio 68. Click on the image to reach my gallery where she posted it, so you can give her some love. How long do you think it would have taken to cut out all those circles?

New script – Noted

March 6, 2021March 11, 2011 by Cassel

This script for PaintShop Pro will let you create fun journaling tags for just about any occasion, layout or kit. You choose the size and the base color, and run the script. That is it. Oh, wait. You have options. You can choose the colors of the lines, and the number of lines you want to show. In the end, you have unmerged layers so you can remove the outline if you want, remove some lines, change the color of some, etc. You can also create tags to print. Great for hybrid use.

You can get this script at either one of my stores: Creation Cassel, DigiScrapWarehouse.

And as usual, if you want to have a chance to win this script, hop over the DST forum in this thread and tell me what is the oddest shape tag you ever used.

cass-Noted-tags What about a free sample of what this script can do? Here are three fun tags you can use in your layouts or kits (remember that you cannot use these AS IS, commercially, but you can if you modify them). What do you think?

You need to be logged in to download this sample. You can either login, or register on the top of this page.

New script – Worn Edge

March 6, 2021March 4, 2011 by Cassel

The idea for this script is an old one. In fact, i had a similar script in a grab bag about 2 years ago, but this time it is much more advanced, and has more options. It also works with Paintshop Pro 8 now.

This script will “chew up” all around the edges of any element or shape you want. You can have a little wear, or more. Then, you can decide if you want to add a light, dark, colored or no border all around. This is already giving a lot of flexibility to match any kit or layout. But wait, you can also choose to have a thin, medium or thick edge, so that is even better!

You can get this script in my stores: Creation Cassel and DigiScrapWarehouse.

Would you like a chance to win this script? Check out this thread in the DST forum and just go add your name. A winner will be announced on Monday night.

cass-WornEdge-sample

How about a little sample of what this script can do? You can get these free tags in png format for you to use in kits or layouts.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

Now, are you anxious to hear about the February promotion winners? The draw has been made, and was recorded. The official announcement will be made tomorrow, in the newsletter, and then, i will post on this blog. But of course, if you are more curious, and want to know the result the earliest you can, just make sure you are subscribed to my newsletter. If not, you can still subscribe here.

And the CHAT? Did you remember our monthly chat? It will be held tomorrow at 3pm ET in the DST chatroom. (that makes if for around noon on the west coast, and evening for Europe) Tomorrow’s topic: Brushes. See you there!

Corduroy sampler

February 26, 2017December 4, 2010 by Cassel

cass-Corduroy-sample

Did you think i had forgotten about a sample this week? I guess i was just not quick enough. I didn’t know what kind of sampler would be useable and then, i thought of one pair of pants i had to patch/customize for my daughter and when i asked her what design she would like, she said “mushrooms”. So i figured that if a mushroom appliqué was interesting for her, it might suit you too so here is my sampler for this week.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

The appliqué is about 900 x 900 pixels and the texture was created using the Corduroy script. Looking at it closely, you can get an idea of what the script can do (all three designs).

Enjoy!