Creation Cassel

New script – Adhesive Tapes

January 20, 2021May 18, 2013 by Cassel

Washi tapes are pretty popular lately but maybe you are looking for something that matches your current project and can’t find the perfect one. No more problem. This script will create some for you quickly and effortlessly based on any papers you want.

The script will generate a variety of tapes based on your choice of thickness, whether you want them to all be the same thickness or varied, and within the minimum and maximum length that you will determine.

You can choose any number of papers to have the tapes cut from.

All the ends will be cut at an angle, just randomly. There is also a discrete shading added to each tape to make everyone of them unique.

Finally, all the tapes will be grouped in one single file, in individual layers for your convenience. It will be up to you to delete those you don’t care for, and keep the others. You can then separate them and save them individually or simply save the file with up to 50 tapes in it.

Although it is meant to look like adhesive tapes, you can also use the end results as ribbons too. The possibilities are endless.

You can grab this time saving script in the store at Creation Cassel.

Do you want a chance to win this script? Check out this thread in the DST forum and add your name along with a suggestion on how you would use those tapes. I will be back on Monday night with the name of a winner.

cass-AdhesiveTape-samples To give you an idea of what this script can do, i created a set of solid grey tapes, and just added some brushwork on them. See, instead of using actual papers, you can simply use solid colors and then generate plain tapes that you can also use as templates for painting on, adding text, etc.

The tapes in this sampler are stamped with the days of the week so you can use them to embellish your daily layouts. Since they are all in greyscale, you can colorize them to match your project, add texture to them, even rip some of them and crinkle them.

What would you do with them? Remember to show off!

You need to be logged in to download this sample. You can either login, or register on the top of this page.

New Font – Leaves

January 20, 2021May 11, 2013 by Cassel

How do you add leaves to a stem or a vine? One by one? That is long and tedious. Using Vector shapes? That is still long and requires placement one at the time to match the stem. Brushes? But that wont allow to place different ones all along.

This is a FONT, meaning that you can place them along a path (which will be the stem). You can choose the colors, as if they were brushes. You can choose how close they are together by adjusting the kerning. They are always placed perfectly along the stem as they are made to match the path. You can use a single shape repeatedly, you can choose a few shapes and repeat the sequence or alternate, or you can randomly hit keys on your keyboard for a more random look.

And since you are creating those leaves from a font, they will be in vector format, allowing you to resize them as you wish, without losing quality.

Best of all, this FONT can be used in most graphic program that allow outside fonts, or you can simply install it if you feel you will use it often. So, whether you are using Paintshop Pro, Photoshop, Photoshop Element, GIMP, you can use this font.

You can get this font in my store, Creation Cassel.

As usual, i have a little draw for you to win this font. Just check out this thread in the DST forum and tell me what program you are using. If you also have some ideas on how to use this font, go ahead and share those ideas! I will be back on Monday with the name of a winner.

cass-Leaves1-sample For a sample of how this font can be used, i created a little flowery branch that you can use on your layouts. It is about 2000 pixels high and in PNG format so you can use it no matter what program you are using.

To create this effect, i simply started with a vector path (the stem), and randomly added characters from the lower row of my keyboard (z,x,c,v,b,n,m) so all the leaves would match. Using a simply feathered selection, i darkened the edges of the leaves, then added a standard flower from the Picture tubes available in my PSP.

It is a very simple process and i could have done the same thing with a vine going all around a page, or create a fun frame with it.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

New script – Threaded Ribbon

February 25, 2017May 3, 2013 by Cassel

Threading a digital ribbon on a digital paper, might not be something too hard to do, but it is tedious. If you want to accomplish this task faster and more accurately, you can do so with this script.

Choose to thread your own ribbon through slits or eyelets. You choose the number of slits or eyelets to create along with a few other options to give you a very customizable result.

You can use this script to thread ribbons to match your folded ribbons, your knot or your bow. You can use it to put a threaded ribbon on a page, to create a frame, on a photo, on the edge of a card or envelope, and more.

What would you create with this script?

You can get this time saving script in my store : Creation Cassel.

There is also a thread in the forum where you can add your name and get a chance to win this script. Check out this thread and don’t be shy!

cass-ThreadedRibbon1-sampler

For this week’s sample, I created this fun card for Mother’s Day. You can use it in one layout about your mom or another important mother in your life.

The ribbon was threaded using the script. The vertical threading was made by first rotating the whole project by 90 degrees since the script will only work on a horizontal ribbon.

The detailed edge was made using the Edge font along a vector path. Isn’t that neat?

This card is in PNG format so just about anyone can use it.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

News from the Campus

Congratulations to the winners of the BIG Show Off contest:

Filter Forge 3.0 - Mizfit Mania
PSPX5 - Giovina Rosignoli
PSPX5 - Mireille Fratini (mimi13)
5 Master Classes - Karon Day

what are all those settings for?
how do you get text on a path?
how do you get the text at the bottom of the circle to read upward?
how do you type a text INSIDE a shape?
what else can you do with the text tool?
the text tool can be used for other purpose than text; like what?
a few neat tricks to use with the text tool

Date: Sunday, May 5th, 2013
Time: 5pm Eastern Time
Cost: FREE!
Register now and send us your "text challenges"

New script – Card & Envelope

January 20, 2021April 26, 2013 by Cassel

This week, i decided to offer something for our hybrid crafters friends. A while ago, i coded a script that would allow the user to create a custom size/shape gift card box and it was very popular for the holiday season when people often give away gift cards. That is when some users asked me to create other scripts to make hybrid projects. So here is one for you.

This script will NOT create the cards but will create the template for a card AND an envelope that you can then personalize. You choose the size and the flap design and the script will create what you need. Everything is left in separate layers so you can colorize or customize each section separately if you want, whether it is the flap for the envelope, or the front of the card only.

You can create tiny cards as small as 300 x 300 pixels (perfect for little notes, Advent calendars or other) or regular size ones up to 1800 x 1200 pixels. One neat feature of this script is that the maximum size template can still be printed on a regular home printer: no need for extra wide (and costly) printer or having to go to a print shop for it.

This script allows you to create a perfectly sized envelope if you crafted a custom card with your scrapbooking supplies or other. And of course, you can still add traditional 3d decorations to the printed card! Or you can just create blank templates and use them as base for your traditional card making.

Since this is really a TOOL script, you can use it to create CU products.

You can get this convenient script in my store: Creation Cassel

You can also win this script by adding your name and tell me for which occasion you are most likely to use this script in this thread in the DST forum. I will be back on Monday with the name of a winner.

cass-Card&Envelope-sample As a sample of what this week’s script can do, i created a card for you. It has no text so you can include your own personal note and wish, in any language you want, on the computer or by hand.

It has one folding card and a matching envelope that are 1200 x 900 pixels. Not a big card, but just something you can give a friend, your mom, your colleague, etc.

I used a FREE kit called “Doux Bruisssements”. This is only one of a series of free kits that are offered on that blog. They have one every month. It is definitely worth checking out that French site!

Once you download the files, you can just add something on top of the card and print both the card and the envelope, cut them, fold them and add something inside the card for whoever you want to give the card to.

And voilà, you have a perfectly matching card and envelope.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

April Birthday Promo

Did you remember to shop this month? Did you accumulate enough purchase to give you a nice coupon for May? You still have just a few days to reach whatever goal you set for yourself. This weekend, i should be sending you a note with how much you have accumulated so far for your May coupon so you might want to start another wishlist to use it!

News from the Campus

The BIG Show Off is also coming down to the last few days. Did you see all the projects members are showing off? Did you leave some comments for them? See what Nadine posted:

Isn’t that lovely?

The Extraction Master Classes bundle is still available for a few days, so you better hurry before it is removed. If you use the code EXTRACT5, you get an extra $5 off the already reduced price for the two classes.

Get it NOW

(remember that any purchase in the Campus will also be added to what you might have spent in the store to increase your May coupon!)

If the Extraction Master Classes bundle offer expires on Monday, another deal will be offered but since the month of April is only a few days away, that deal will ONLY last for Monday and Tuesday. You don’t want to miss it so keep a very close eye on the Campus or even better, register in the Campus so you can get an email notification for it.

WARNING: it will ONLY BE FOR 48 HOURS!

New script – Fill’n Match

January 20, 2021April 12, 2013 by Cassel

More and more designers like to incorporate matching tags, or cards or other elements into their kit. More and more scrappers like to have something matching the kit they purchased or the layout they are making but might be missing those elements. To do them by hand is ok if you only have a couple to do, but what if you need a whole set? That can quickly become a long task.

With this script, you can start with any simple template (simple works best), choose any number of papers to pick from, select colors from your color palette and let it do its magic. You can generate up to 10 copies of the basic template, using a randomly picked paper and randomly picked color.

And all that can take you less than one minute to accomplish. Of course, the script does not have a good eye for color combinations so you might very well end up with ugly matches, but it is not a big deal: just delete those and keep the ones that ended up as great combos.

You will determine which layers will be replaced by papers, which ones will be replaced by a color and the script will leave all the other layers untouched. Since all the resulting elements will be left in layers just like the starting template, you can still tweak any one of them as you want.

You can grab this time saving script in my store: Creation Cassel

cass-FillnMatch-sample-tags Do you want a chance to win this script? You can do so by adding your name to this thread in the DST forum and give me more ideas on how you could use such a script. I will come back on Monday night with the name of a winner. Remember that even if you purchase the script, you can still enter the draw and if your name comes up, you will be able to get a coupon for a future new release.

For a free sample, i prepared a set of 9 tags (900x600) all made using the same kit from Karenheckyeah called “A summer Place”. You can use those tags for a “Project Life” type of layout since it makes those tags 3x2 inches, or you can use them in other traditional types of layout. It is really up to you.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

It is still April!

The Time Master Bundle is still available for a short time. Monday is the last day this bundle will be available at this price. And Monday, is also the last day you can use the coupon code : TIME5 to get another $5 off the reduced price.

Don’t wait. Get it NOW.

Spend now, Save later

Are you still building your coupon code for May? You still have a couple of weeks to do so. Some of you have already built a nice 50% coupon for next month. I am sure you will be shopping some more! Go for it. Time to shop!

(and remember that what you spend in the Campus is ALSO added to the total)

The BIG Show Off

Did you have a look at the newer projects that members have been showing off? See what Mizfit and Val posted on this thread.

So what will YOU show off today?

And also, i promised you that i would tell you when there would be more prizes to be won. I will now have a SECOND copy of PSPX5 to win, so you have 2 chances to upgrade to X5! And i am still waiting on other partners and prizes.

Go check the BIG Show Off in the Campus

New script – Repeat

January 20, 2021April 5, 2013 by Cassel

If you want to create a long border with a specific design, how do you achieve that? Probably with a lot of copy and paste and move, and copy again, paste again and move again. This can be pretty tedious if you want to create a long strip of repeated pattern. And how do you make sure the spacing is perfectly even? That is another challenge.

This script does all the hard work for you and will take just a few seconds. In addition, you get many options in the type of repeats you can get AND you are the one deciding how the spacing should be.

You can have a simple straightforward repeat, but you can also have the design alternating up and down, or have it mirrored, or flipped, or both. You can even have the design overlap if you prefer.

You can use just about anything you want to repeat, whether it is a vector shape, a dingbat, a hand drawn design, an element, even an extracted element from your stash (just beware of any shadowing though).

And since the elements can be left unmerged (if you prefer), you can still tweak them individually, colorizing them, replacing one of two of them, and more.

You can get this very versatile script in my store: Creation Cassel

What could you do with this script? Give us some ideas in this thread in the forum, for a chance to win it.

cass-Repeat For this week’s free sample, I made this simple frame out of a dingbat that i colored. I used the mirrored repeat and slightly overlapped the first repeat with the original design, then, as the script offered me to merge the first two, i chose a different spacing for the following repeats.

Once a long strip of repeats was done, i selected a smaller portion of the strip to create the sides, and just with duplicates, and mirror and flip, i adjusted each side to create a frame. Very simple to do once you have the basic strip!

You need to be logged in to download this sample. You can either login, or register on the top of this page.

April Promotion

Yes, it is here now. The BIG April Promo is in full swing and you can participate in several different ways.

Spend now, Save later

Every dollar you spend in the store AND the Campus during the whole month will be compiled and will earn you a coupon you can use in a purchase in May. It is simple:

Spend $20 in the whole month, you’ll get a 20% off coupon

Spend $30 in the whole month, you’ll get a 30% off coupon

Spend $40 in the whole month, you’ll get a 40% off coupon

Spend $50 in the whole month, you’ll get a 50% off coupon

Spend $60+ in the whole month, you’ll get a 50% off coupon AND an additional entry into the Big Show Off draw

The Big Show Off

This is where you can show off anything you did (layout, kit, hybrid project, etc.) based on something you learned in the Campus. You link to your project AND to the tutorial, class or tip. You can win one of the fantastic prizes (including one copy of Filter Forge plugin, which DOES work with PSP even if they say it is a Photoshop plugin).

We already have a few great projects posted in the Campus. Check these, from Val, Yobeth and Mireille:

And there are more.

Check out the Big Show Off

Bundle of the week

Until Monday, you can also grab a great deal in the Campus: the Photo-Graphics with PSP bundle is available for $24.99 (instead of $39.99 if you bought them separately).

Even better, if you are using the coupon code: PHOTOGR5 you get an additional $5 off meaning that you end up with TWO Master Classes for $19.99, which is, in fact, the price of one!

Hurry, it is only available until Monday, April 8th. After that, the bundle will go back to the regular “bundle” price of $29.99, and the coupon will have also expired.

Get that Bundle NOW!

New script – Distribute Rasters

January 20, 2021March 28, 2013 by Cassel

Do you sometimes have various elements, like flowers, beads, or even frames that you would like to have evenly distributed? In PSPX4 and X5, there is a function like that but if you are using an older version, the only way you can do it is using the guidelines and measuring the spacing yourself and then finding the center of each object to move them accurately.

That is a bit of work that you can avoid with this script. In fact it will take it just a few seconds to accomplish what might take you a few minutes.

In addition, this script can also distribute elements evenly on a diagonal line, based on the width and the height of the image. Even PSPX4 and X5 don’t do that!

If your elements are the same size, the spacing will probably be pretty even, but if the elements are of different size, don’t count on the spacing as the script measures by the center of each element.

Unfortunately, it is only compatible with PSP9 and up (sorry for the PSP8 users out there).

You can get this script in my store: Creation Cassel.

I also have a giveaway in the DST forum. Simply tell me, in this thread, what PSP version you are using and your name will be entered in the random draw for Monday night.

cass-PipeCleaner-sample-bunny Just like last week, it is kind of hard to give you a sample of a tool script, so i opted for giving you a spring element (or Easter theme, if you prefer). I made this bunny out of the pipe cleaner picture tubes from the store. This is a PNG format element about 1500 pixels high. I added some fun shadows to give it some volume and the shadows are part of the element.

Those pipe cleaners are so much fun to play with. Just like the real 3D ones you can bend and twist, you can do just the same thing with your mouse. You even have the advantage of being able to make them much longer than the real ones!

They were Mendy’s idea and here is what she said about them:

“This one [product] is so much fun. Makes you feel like you are a kid again. They are so real looking that you just want to reach out and touch them. Love it!”

You need to be logged in to download this sample. You can either login, or register on the top of this page.

April is near

Yes, yes, i told you that last week, didn’t i? And i am sure you know it is only a couple of days away. But did you figure out what it will be about? Did you guess from the hints? Let’s add a bit to the list:

Hint #1: get your wishlist ready (i really mean it!)

Hint #2: check the Master Classes in the Campus (watch the video for the free one or any other you might have purchased)

Hint #3: get ready to scrap

Hint #4: FF often stands for Firefox, but for something else too!

Hint #5: something will happen on “school ground” too

See you soon! I think there might be something more in the Newsletter, Sunday morning.

Subscribe now

New script – Align Rasters

January 20, 2021March 23, 2013 by Cassel

If you are using an older version of Paintshop Pro, you surely have noticed that you can align vector objects, but what do you do if your objects are NOT vectors? You have to rely on the guidelines, and snap the objects to the guidelines.

In newer versions of PSP (X4 and up), since you can select several layers, the ability to align raster objects is added, but if you are using an older version, it was not possible, until now.

This script will allow you to align raster objects in 7 different ways: top (aligning with the top of the highest top), bottom (aligning with the bottom of the lowest bottom), right (aligning with the right edge of the furthest object to the right), left (aligning with the left edge of the furthest object to the left), middle (aligning all the objects based on the center of the canvas), center vertically (align with the vertical center of the canvas), center horizontally (align with the horizontal center of the canvas).

Only one script includes all the seven alignment options. Bind the script and add it to your menus for a two click process: one click to run it, one click to choose the alignment. No other message window is added to create the fastest process.

You can get this script in my store: Creation Cassel.

There is a random draw available in the DST forum where you can win this script. Just add your name to the thread and tell me what version of PSP you are using. I will announce the winner on Monday night. Check this thread HERE.

This week, your free sample was made using the Banner FONT. You get a SPRING set in PNG format, and a blank set in PSD format.

You can add any letter or design to the blank banners to suit your own layout or project.

Remember that those banners are made from a FONT. That means that it can be used in most programs, and if your program allows you to add text to path, you can hang the various flags along the “vector string” for a perfect positioning.

In addition, the font includes no less than 50 different shapes that you can combine, and use in any size without losing quality, and you can have an outline and a fill material that will suit your theme or project. This is much more versatile than simple PNG banners!

You need to be logged in to download this sample. You can either login, or register on the top of this page.

April is coming

Yeah, what’s new about it? Something big, i tell you! You have to stay tuned to learn more about it but i can give you some hints:

Hint #1: get your wishlist ready

Hint #2: check the Master Classes in the Campus (watch the video for the free one or any other you might have purchased)

Hint #3: get ready for a BIG event!

New script – Loop #1

February 25, 2017March 15, 2013 by Cassel

You can now create a simple loop from any ribbon that you already have. Use these loops as an accent, fasten them with a staple, a brad, stitching, or an eyelet. The script can actually create an eyelet for you that will be proportional to the size of the ribbon.

You can tuck the loop under a photo or an element, you can use a particular ribbon with text message or shapes to match your project.

The script has a random feature integrated which means that even using the same ribbon, each run will yield a slightly different result. The length will differ and the segment of the ribbon used will be different.

The script will end in unmerged layers with NO shadows on the ribbon pieces. Why not add a shadow with the script? Because you might want to mirror the loop or have it vertical, or at an angle, and if the script was to add shadows, then they would become very odd looking after rotating the whole thing. You know how it is with shadows: if they are in the wrong direction, it can make your layout look totally weird, and you surely dont want that, do you?

This script is available in my store: Creation Cassel.

And if you want a chance to win this script for free, just post in this thread, in the forum and tell me what you could use this kind of loops for. Be creative. Think a bit outside the box so to speak and share some great ideas. The winner will be announced on Monday night.

cass-Loop1-samples

As a free sample today, i thought of creating a ribbon with a date (in fact it is a year) and making a loop out of it. I repeated the process for 3 years. If you are patient, you might be able to create a ribbon for each month, or each day of the week or if you are REALLY brave, one for each date of a whole year! Why not?

You need to be logged in to download this sample. You can either login, or register on the top of this page.

What will you do with those? Show us how creative you are.

New tubes – Zippers set#4

March 6, 2021March 8, 2013 by Cassel

Zippers, zippers, zippers. We use zippers everywhere now. Of course, we see zippers on clothing, like coats, jackets, pants, dresses, but we also use zippers in upholstery (to wash those cushion covers), in purses, luggage, and more. Now, you can even add them to your scrapbook pages too.

These zippers are the 4th set. They are made of 3 directional tubes: one for the closed teeth, one for the left open teeth and one for the right open teeth. This means that you can “draw” your zipper as long as you want, and in any direction or shape you want. You can have it mostly open, or mostly closed, you can join two different “fabrics”, you can have a photo peek through, etc.

And the pulls are made in two files too: one is the layered base so you can slip a pull as realistically as you can. And of course, each zipper as its original pull to match. But you can surely mix and match, especially if you can recolor them. Play with the shadowing to get great looks. Add decorative elements to the pull, just like we can see in real zippers, whether it is a monogram, a string of beads, or other creative add-on. What would you do with those?

You can grab this set of zippers in my store: Creation Cassel.

Have a look at the other three sets of zippers you can also grab.

I have a giveaway in the DST forum where you can win the latest zipper set. Check out this thread, and tell me if you ever used a directional tube before, and if so, which one. I will be back on Monday night with the name of a winner.

cass-Zipper4-sample

This week, i just created a simple zipper for you using the white set. The various elements are in layered format so you can change the pull, move it, even shadow the elements differently. There is a separate shadow layer for the pull shadow, but you can surely modify it, or even replace it if you want.

With the hollow pull, you can surely add a design in the middle, fill in the hole and draw something, or attach a bunch of decorative elements, like beads, strings or ribbons. What will YOU do?

This is offered in PSD format so most non-PSP users can still use it. It is pretty large (3600 pixels high) so you can size it down to meet your need.

You need to be logged in to download this sample. You can either login, or register on the top of this page.