Cassel | Creation Cassel

Multi-Photo Frame – Sampler

January 19, 2021May 24, 2014 by Cassel

cass-MultiPhotoFrame-3x1

What would you do with a multi-photo frame? Here is one such frame created with the Multi-Photo Frame PSP script. Each photo placeholder is 600x800 pixels, which would match a 3x4 inch photo (just resized).

All the layers are left unmerged (including the shadows), so if you prefer to combine two adjacent photos into a larger one, you can do it on another layer, and remove the initial two.

How about removing the middle placeholder and have the photo under the white mat? Yes, you can do it as there is a hole hidden under that placeholder, complete with its shadow too!

This frame is in PSD format, so even non-PSP users can play with it.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

(if the link is not active, just login or register on the top of the page).

What will you do with this? Show us. You can either post in the comments below, or on the FB page HERE, or pin on our Pinterest PSP Scrapbook Pages board.

(if you don’t have “permission” to pin on that board, just ask for an invite)

New script – Multi-Photo Frame

May 24, 2014May 23, 2014 by Cassel

In many situations, one would like to have multiple photos in a single frame. Maybe you want to have all 12 school pictures of your child, or one photo for each of your 3 kids, or a calendar of 30 photos for a month. Whatever the purpose of a multi-photo frame, it is fairly easy to do, BUT it is tedious.

To get a perfectly aligned set of photos, you need to use guides, many guides, especially if you also want to have the spacing even.

This PSP script will take the aligning, and measuring task off your hands. Simply start with a single image in the size you want the photo placeholders to be, choose how many rows and how many photos per row, the spacing and the size of the mat and watch it do all the work for you. Go grab a coffee and it will be done when you come back.

The script will create everything on separate layers, including the shadows. And if you don’t want the photos to be on top of the white section, no problem. That white section is actually a mat with matching holes so if you remove the photo placeholders, you will still get a multi-photo frame, where you can slip a photo or many photos underneath (and that mat also has a drop shadow!).

One additional detail you MIGHT have noticed: this is CU4CU, meaning you CAN create templates for CU purpose.

Grab this time saving script: Multi-photo frame script.

You can change the spacing and the size of the outer mat to get completely different frames, even if you are using the same placeholder size. And since everything is on a separate layer, you can always tweak the result, remove some placeholders, replace others for a completely new look.

What would you use such a frame for? Tell me in this thread, and you will get a chance to win this script.

What is a resolution?

May 18, 2014 by Cassel

Have you seen those mentions of 72ppi, 200ppi, 300ppi and wonder what they are?

Check out the detailed explanation on what “Resolution” means in your graphic projects and how it can affect (or not affect) your work.

READ ABOUT IT.

New script – Worn overlay

January 19, 2021May 16, 2014 by Cassel

I have looked through my stash of overlays and although i have a pretty good number of them, i always feel like i don’t have the one i want. I have lots of standard size and shape ones, but they are a bit awkward to use on a different shape element, especially if the edges are worn too.

So this script for Paintshop Pro was created. It will use any shape you have, any size. This means that you can have a photo in an odd format, you can have a frame, you can even have individual letters for an alpha and the script will create something exactly for that shape.

And with the random feature, every run will give you something different, even for the same starting element. Isn’t that fun? That means that if the script gives you a particular overlay and you don’t like it, simply undo it, and run it again, and you will get something else. Repeat until you have something you like. It is so fast, that you can run the script 10 times in the time it would take you to create a single overlay, manually.

Grab this script in my store: Worn Overlay script.

See a couple of examples of other results, one with a photo and one with a simple arrow to be use in a project.

Let’s have a closer look at what this script can create. I started with a simple tag shape, in grey. I left it in vector format as the script knows what to do with it (meaning, if it is a vector, it converts it to a raster to continue). I ran the script 4 times on the same image. Since the image was less than 1000x1000 pixels, it worked on a resized version of the image (because the effect, done on a smaller image is not as good). However, the script is smart enough to resize the overlay once it is created so it will match the starting element.

On 3 runs, i asked to have an obviously worn border, so you can see the white edge. On the last run, i chose not to have an obvious border. It still adds a faint edge in some spots, but it is definitely not as obvious as the other three!

All four overlays AND the base tags are included in the zip file, so you can use the tag shape as a template and just layer the overlay. Then, it is up to you how you want to “merge” them. Depending on the color or pattern of the tag, you can darken the overlays and make them black, or you can use a blend mode. Also, since they all fit on the same shape, you can even layer more than one overlay for an even more tattered look!

You need to be logged in to download this sample. You can either login, or register on the top of this page.

(if the link is not active, just login or register on the top of the page).

The download link will only be available for a limited time.

Challenge results

January 2, 2017May 10, 2014 by Cassel

Last week, in the newsletter, i provided a layered covered frame, in greyscale and challenged everyone to do something original with it. It was really interesting to see what people came up with.

Did you participate in that challenge?

This is not a challenge to win something, or accumulate points, but a challenge to simply encourage you to be creative and share your result to inspire others. It is so easy to use elements in a “traditional” way, while in fact, there is much more that one can do with Paintshop Pro.

Let’s have a look at those projects.

Garry has been a regular attendees to the live presentations.

He likely used the colors from the photo (a nice looking cat by the way) to colorize the frame. Simple, yet effective!

Judy provided 3 very different uses of the same starting image.

As she said, you don’t need to use all the individual ribbons separately, so she merged the ribbon layers, colorized them, and used the PSP curlicues effect.

Very different from Garry’s frame, isn’t it? but that’s not all.

Here is another frame made by Judy. She said:

“The green one is also layers merged, then colored with a pattern, then the PSP weave effect applied. The birds and bows were added just to show how you could frame a picture with this.”

Finally, this one is very colorful and likely took longer as each individual ribbon layer had to be colorized separately instead of merging all the layers.

I think this is a great use of the traditional blue, white and red colors for our American friends (i think the French ones would like it, if the 4th was switched to the 14th). Of course, the decorative elements inside add to the theme.

How about you? What could you make with that layered wrapped frame? Not a subscriber to the weekly newsletter? Not a problem. You can SUBSCRIBE now.

New script – Quick Scallops

May 10, 2014May 9, 2014 by Cassel

Scallops can be a delicate addition to the edges of elements. Although it is not too hard to make, we always love the idea of achieving that effect quickly and mostly, accurately.

This PSP script will do that for you much faster than you could do it by hand. In addition, it will always match the size of your element perfectly. You will not end up with a half scallop on the end of the ribbon or on the edge of the tag. The script will do the measuring perfectly. Furthermore, this will be extremely important if you want to add scallops on all four sides of an element, a photo or a mat.

What can you use this script on? Anything that has a straight, horizontal and vertical edge. It could be the bottom of a tag, a photo mat, a journaling card, a long ribbon, a frame, or more.

You can grab this time saving script in my store: Quick Scallops script.

What will YOU do with scallops?

If you want a chance to win this script, post your response in the RAK thread in the DST forum.

New script – Wrapped Frame–Round

May 3, 2014May 2, 2014 by Cassel

A few years ago, i wrote a tutorial on how to create a wrapped frame effect with Paintshop Pro. It is a fairly simple tutorial, but it is a long process, and requires precision.

Although you can surely do that yourself, using a tutorial in the Creative Scrap Course, you might also want the convenience and speed of using a script instead.

This is what i came up, when i was looking at that tutorial. You can use ANY ribbon you have, whether it is wide or thin, opaque or translucent, plain or patterned, or even if you are using a directional design on it (like that measuring tape in the preview).

But you are not limited to only one-size-fits-all type of frame. You can choose a frame from 400 pixels in diameter for a tiny photo to a 3000 pixels frame for a whole page. Furthermore, you can have a thin frame or a thick one. But you think that is all? Think again. You can also have the ribbons overlapping, to wrap the frame almost completely, or leave some obvious space between the ribbons for a totally different effect. Do you want the ribbons to look like they are around a thick base? Add a bevel. The script will also add a drop shadow to all the pieces if you want. Most of the time, that will be your choice, but in case you want to manipulate the end result more, maybe have some flipped ends, or something like that, you can skip the shadow step and add them yourself afterward.

And yes, since all the layers are left unmerged, you still have a lot of options to manipulate and tweak them to create something really custom.

The base frame is even left in there also for you to possibly use it as a template to create something else.

See what i did with the same frame:

What else could be done? Your imagination can go wild with this!

Grab this fun time saving script: the Wrapped Frame – Round script.

Did you ever wrap a frame with a ribbon like this? Tell me in this thread in the Happy Place for a chance to win it. I’ll be back next week with the name of a winner.

This week, i wanted to give you a little challenge.

In the newsletter, i will include this layered ribbon wrapped frame, in grey scale. It will be up to you to turn this “ordinary” looking frame into a piece of art.

It is fairly big (2000 pixels wide) so you will have plenty of room to do something cool. I saved it in PSD format, so all the non-PSP users can also get into the fun of it.

What can you do with it? Here are some ideas:

- colorize the layers (all or some)

- remove some layers to make room for something else

- use the base template to create a prettier base

- add decorative elements to the whole project, like a cluster

- resize copies of the frame to layer them

What else will you do? Make sure you check the newsletter tomorrow morning so you can work on this challenge and show us your result. You can post it on our Facebook page, in a comment below, or just send it to me by email and i can post it either in the store or the newsletter.

Time to have fun!

New tubes – Wool

April 26, 2014April 25, 2014 by Cassel

Do you like the look and feel of soft woolly elements? Are you looking for those elements all over the net to add to your graphic projects? Although you can probably find strings, ropes and ribbons, wool is harder to find because of that fuzzy texture that is terribly hard to extract. And if you are lucky enough to find one, it might not be in the color you want, or the shape or size or length you want. What can you do?

If you have Paintshop Pro, you can use these fun tubes. Yes they are tubes, which means you can simply draw with them and have a wool “string” in any shape, or length you want. You can use straight lines, place the wool along a vector shape (with the Vector Tube script), or just hand draw it.

This set includes 12 different colors. They are slightly different in size and texture, which will make for something more realistic, don’t you think?

You can grab this set of Wool tubes in my store. Remember they are 25% off until Tuesday.

If you want a chance to win this set, just check out the thread in the Happy Place and add your name to the thread and give me one suggestion on how these could be used. Who knows? I might just create something from your ideas!

What can you do with those? See what i did. I used a heart shape and since it was a vector, i just ran the VectorTube script on it. Then, on a new layer, i simply wrote, freehand, the phrase “I LOVE YOU”. Simple enough, isn’t it?

This actually reminds me of a little pillow i sewed fr my husband, many years ago. I did some simple patchwork on one side and on the plain side, i put the words “I Love You” in wool, but just sewed the wool on the fabric. I think we still have that pillow somewhere as i seem to remember seeing it not long ago when we moved things around.

What would you do with those?

New script – Engraved Rocks

April 17, 2021April 18, 2014 by Cassel

Whether you want to add a date, a name, an event or simply an inspirational quote, this script will help you create these elements in just a few seconds.

You can start with any single word, phrase, number or even a design and the script will create a rock based on the size of that text (or design). You can use any size you want and the end result will be about one an a half time the width of the text. Beware that very large image will be slower to create.

Since the script will create a DIFFERENT rock every time, maybe you have some preferences for lighter rocks or darker ones, or specific shapes might look better. Ask the script to create more than one (you can ask for as many as 20) and you can pick and choose which one you want to keep.

As a bonus, for each engraved rock the script creates, it will also generate a blank version of it. This will allow you to possibly “paint” something else on the rock or just have a blank one for another project.

Grab this inspirational script of Engraved Rocks in the store.

Do you want a chance to win this script? Head over to the Happy Place and tell me of one word you would like to see in a rock that you would use. Next week, i will draw for a winner, but not only that, EVERYONE who will post with their one word, will get an inspirational rock made with that word. So, you don’t even have to be a Paintshop Pro user to get a rock!

This week, i thought i could do something traditional, yet a little different. I created a series of 3 rocks with some common words “Live”, “Love” and “Laugh”, but i thought of adding a little twist by also creating a “Scrap” rock!

Each rock is around 500-600 pixels wide.

What do you think? This set of rocks will be sent out in the newsletter this weekend. Are you subscribed yet?

If not, subscribe now.

New script – Folded Edge

April 5, 2014April 4, 2014 by Cassel

Creating a folded edge on papers, photos or mats can add a definite 3D effect, but it is not always easy to do.

If you are using templates, with each folded piece on a separate layer, you can probably get away with using a plain type of paper, however, as soon as you want to use a patterned paper, or something directional, the templates will not give a realistic result.

Creating the folds manually is one way to get the correct angles on the patterns, but it is quite tedious to match the angles whether you are using the Pick tool or the Rotate function. But, yes, it can be done.

However, using this script will make the whole process much faster and more accurate.

You can use a single paper, and have it fold on itself with both sides being identical or you can pretend you have a two-sided paper, by using two different papers layered on top of each other before you run the script.

The folds will also be custom made. You will choose how many folds you will have, where they will be and how deep they will be because you will place the dots where you want, and the script will execute the commands based on those dots. You can have as many dots as you want, anywhere you want, for a custom look.

You can get this Folded Edge script in the store.

See how this script works:

Do you want a chance to win this script? Check out this thread. Tell me how you would create a folded edge if you didn’t have the script. I’ll be back next week with the name of a winner.

See what can be done with a photo and a slightly patterned paper as the “backing”:

What i did was open a large photo, and added a greyish paper on the layer below. I ran the script on one edge (the top one) first. Then, because it made for a lot of layers and because i was fairly happy with the default shadowing, i hid the photo and paper layers and merged the visible layers. That gave me one layer for all the top folds.

Then, i moved the photo and paper layers on top of the layer palette and ran the script for the right edge. Again, i merged all the little pieces for the right edge making sure i didn’t merge the ones from the top. This allowed me to erase the little bit that extended beyond the right edge (the script didn’t know i had run it on another edge before).

Then, i repeated the same thing for the other two edges. Finally, i just moved the photo below all the folded edge layers.

What do you think?