My products | Creation Cassel

New script – Repeat

January 20, 2021April 5, 2013 by Cassel

If you want to create a long border with a specific design, how do you achieve that? Probably with a lot of copy and paste and move, and copy again, paste again and move again. This can be pretty tedious if you want to create a long strip of repeated pattern. And how do you make sure the spacing is perfectly even? That is another challenge.

This script does all the hard work for you and will take just a few seconds. In addition, you get many options in the type of repeats you can get AND you are the one deciding how the spacing should be.

You can have a simple straightforward repeat, but you can also have the design alternating up and down, or have it mirrored, or flipped, or both. You can even have the design overlap if you prefer.

You can use just about anything you want to repeat, whether it is a vector shape, a dingbat, a hand drawn design, an element, even an extracted element from your stash (just beware of any shadowing though).

And since the elements can be left unmerged (if you prefer), you can still tweak them individually, colorizing them, replacing one of two of them, and more.

You can get this very versatile script in my store: Creation Cassel

What could you do with this script? Give us some ideas in this thread in the forum, for a chance to win it.

cass-Repeat For this week’s free sample, I made this simple frame out of a dingbat that i colored. I used the mirrored repeat and slightly overlapped the first repeat with the original design, then, as the script offered me to merge the first two, i chose a different spacing for the following repeats.

Once a long strip of repeats was done, i selected a smaller portion of the strip to create the sides, and just with duplicates, and mirror and flip, i adjusted each side to create a frame. Very simple to do once you have the basic strip!

You need to be logged in to download this sample. You can either login, or register on the top of this page.

April Promotion

Yes, it is here now. The BIG April Promo is in full swing and you can participate in several different ways.

Spend now, Save later

Every dollar you spend in the store AND the Campus during the whole month will be compiled and will earn you a coupon you can use in a purchase in May. It is simple:

Spend $20 in the whole month, you’ll get a 20% off coupon

Spend $30 in the whole month, you’ll get a 30% off coupon

Spend $40 in the whole month, you’ll get a 40% off coupon

Spend $50 in the whole month, you’ll get a 50% off coupon

Spend $60+ in the whole month, you’ll get a 50% off coupon AND an additional entry into the Big Show Off draw

The Big Show Off

This is where you can show off anything you did (layout, kit, hybrid project, etc.) based on something you learned in the Campus. You link to your project AND to the tutorial, class or tip. You can win one of the fantastic prizes (including one copy of Filter Forge plugin, which DOES work with PSP even if they say it is a Photoshop plugin).

We already have a few great projects posted in the Campus. Check these, from Val, Yobeth and Mireille:

And there are more.

Check out the Big Show Off

Bundle of the week

Until Monday, you can also grab a great deal in the Campus: the Photo-Graphics with PSP bundle is available for $24.99 (instead of $39.99 if you bought them separately).

Even better, if you are using the coupon code: PHOTOGR5 you get an additional $5 off meaning that you end up with TWO Master Classes for $19.99, which is, in fact, the price of one!

Hurry, it is only available until Monday, April 8th. After that, the bundle will go back to the regular “bundle” price of $29.99, and the coupon will have also expired.

Get that Bundle NOW!

New script – Distribute Rasters

January 20, 2021March 28, 2013 by Cassel

Do you sometimes have various elements, like flowers, beads, or even frames that you would like to have evenly distributed? In PSPX4 and X5, there is a function like that but if you are using an older version, the only way you can do it is using the guidelines and measuring the spacing yourself and then finding the center of each object to move them accurately.

That is a bit of work that you can avoid with this script. In fact it will take it just a few seconds to accomplish what might take you a few minutes.

In addition, this script can also distribute elements evenly on a diagonal line, based on the width and the height of the image. Even PSPX4 and X5 don’t do that!

If your elements are the same size, the spacing will probably be pretty even, but if the elements are of different size, don’t count on the spacing as the script measures by the center of each element.

Unfortunately, it is only compatible with PSP9 and up (sorry for the PSP8 users out there).

You can get this script in my store: Creation Cassel.

I also have a giveaway in the DST forum. Simply tell me, in this thread, what PSP version you are using and your name will be entered in the random draw for Monday night.

cass-PipeCleaner-sample-bunny Just like last week, it is kind of hard to give you a sample of a tool script, so i opted for giving you a spring element (or Easter theme, if you prefer). I made this bunny out of the pipe cleaner picture tubes from the store. This is a PNG format element about 1500 pixels high. I added some fun shadows to give it some volume and the shadows are part of the element.

Those pipe cleaners are so much fun to play with. Just like the real 3D ones you can bend and twist, you can do just the same thing with your mouse. You even have the advantage of being able to make them much longer than the real ones!

They were Mendy’s idea and here is what she said about them:

“This one [product] is so much fun. Makes you feel like you are a kid again. They are so real looking that you just want to reach out and touch them. Love it!”

You need to be logged in to download this sample. You can either login, or register on the top of this page.

April is near

Yes, yes, i told you that last week, didn’t i? And i am sure you know it is only a couple of days away. But did you figure out what it will be about? Did you guess from the hints? Let’s add a bit to the list:

Hint #1: get your wishlist ready (i really mean it!)

Hint #2: check the Master Classes in the Campus (watch the video for the free one or any other you might have purchased)

Hint #3: get ready to scrap

Hint #4: FF often stands for Firefox, but for something else too!

Hint #5: something will happen on “school ground” too

See you soon! I think there might be something more in the Newsletter, Sunday morning.

Subscribe now

New script – Loop #1

February 25, 2017March 15, 2013 by Cassel

You can now create a simple loop from any ribbon that you already have. Use these loops as an accent, fasten them with a staple, a brad, stitching, or an eyelet. The script can actually create an eyelet for you that will be proportional to the size of the ribbon.

You can tuck the loop under a photo or an element, you can use a particular ribbon with text message or shapes to match your project.

The script has a random feature integrated which means that even using the same ribbon, each run will yield a slightly different result. The length will differ and the segment of the ribbon used will be different.

The script will end in unmerged layers with NO shadows on the ribbon pieces. Why not add a shadow with the script? Because you might want to mirror the loop or have it vertical, or at an angle, and if the script was to add shadows, then they would become very odd looking after rotating the whole thing. You know how it is with shadows: if they are in the wrong direction, it can make your layout look totally weird, and you surely dont want that, do you?

This script is available in my store: Creation Cassel.

And if you want a chance to win this script for free, just post in this thread, in the forum and tell me what you could use this kind of loops for. Be creative. Think a bit outside the box so to speak and share some great ideas. The winner will be announced on Monday night.

cass-Loop1-samples

As a free sample today, i thought of creating a ribbon with a date (in fact it is a year) and making a loop out of it. I repeated the process for 3 years. If you are patient, you might be able to create a ribbon for each month, or each day of the week or if you are REALLY brave, one for each date of a whole year! Why not?

You need to be logged in to download this sample. You can either login, or register on the top of this page.

What will you do with those? Show us how creative you are.

New tubes – Zippers set#4

March 6, 2021March 8, 2013 by Cassel

Zippers, zippers, zippers. We use zippers everywhere now. Of course, we see zippers on clothing, like coats, jackets, pants, dresses, but we also use zippers in upholstery (to wash those cushion covers), in purses, luggage, and more. Now, you can even add them to your scrapbook pages too.

These zippers are the 4th set. They are made of 3 directional tubes: one for the closed teeth, one for the left open teeth and one for the right open teeth. This means that you can “draw” your zipper as long as you want, and in any direction or shape you want. You can have it mostly open, or mostly closed, you can join two different “fabrics”, you can have a photo peek through, etc.

And the pulls are made in two files too: one is the layered base so you can slip a pull as realistically as you can. And of course, each zipper as its original pull to match. But you can surely mix and match, especially if you can recolor them. Play with the shadowing to get great looks. Add decorative elements to the pull, just like we can see in real zippers, whether it is a monogram, a string of beads, or other creative add-on. What would you do with those?

You can grab this set of zippers in my store: Creation Cassel.

Have a look at the other three sets of zippers you can also grab.

I have a giveaway in the DST forum where you can win the latest zipper set. Check out this thread, and tell me if you ever used a directional tube before, and if so, which one. I will be back on Monday night with the name of a winner.

cass-Zipper4-sample

This week, i just created a simple zipper for you using the white set. The various elements are in layered format so you can change the pull, move it, even shadow the elements differently. There is a separate shadow layer for the pull shadow, but you can surely modify it, or even replace it if you want.

With the hollow pull, you can surely add a design in the middle, fill in the hole and draw something, or attach a bunch of decorative elements, like beads, strings or ribbons. What will YOU do?

This is offered in PSD format so most non-PSP users can still use it. It is pretty large (3600 pixels high) so you can size it down to meet your need.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

New script – Letter Tiles

January 20, 2021March 1, 2013 by Cassel

Do you like a game of Scrabble®? This script will let you create letter tiles as if you were playing the game, but with more variety than what you would get by scanning and extracting the actual letter tiles.

You can create wooden tiles, in 5 different types of wood, but you can also use other support, whether it is a solid color, or a pattern.

The script is coded to offer you the option of creating the letter tiles with values based on the French, English, Spanish or German version of the Scrabble® game, since the values are slightly different from one version to the other.

You can also choose any font you want, and any color you want too. Unlike the traditional Scrabble® game, you can also have numbers, punctuation symbols or any other design by choosing the custom option. In that option, you can decide yourself the value of the tile. Of course, you can also create blank tiles if you want.

The script is coded in a way to generate slightly different background for every tile (except for the solid color ones), so it is more realistic. You can create one letter at the time, or type in a word, a phrase or the whole alphabet and the script will generate one tile per letter, including any blank for spaces.

You can grab this fun script in the store: Creation Cassel.

In addition, there is a thread in the Happy Place where you can tell me what language you would use to base the value of the tiles. And i will be back on Monday night with the name of a winner.

cass-LetterTiles-sample Of course, you can use those letter tiles to create a title on a layout, or maybe a wordart too, but for a sample, i created a frame for you. It is a PNG format so you don’t have to have PSP as a graphic program. It is about 2100 pixels high. Of course, you can always resize it down if needed. the shadows are already placed on the whole montage.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

What will you do with this frame? Will you show us your masterpiece?

News from the Campus

Did you get a chance to view the video from the last presentation on Photo-graphics with PSP? It is available in the Campus for free for one more week. Check it out:

This Sunday we will have another FREE live presentation on Photo-graphics with PSP – Part 2. Did you register yet?

New products – Lined Papers

January 20, 2021February 22, 2013 by Cassel

Do you see those Photoshop styles everywhere and wish you could use them in Paintshop Pro? This time, I created a set of 9 lined paper seamless tiles that you can use as you wish from the Material palette, but it also has 9 sculpture presets that you can use to apply to a solid color shape (any shape) with predetermined settings (that is why they are preset, right?)

Since the tiles are seamless, you can use them to floodfill any shape of any size. Of course, you can manipulate them further by adding some writing, doodling, stains, creases, tears, and more. You can colorize them to tint them in a color to match your photo, your layout or your kit.

The patterns and the presets are inside folders and if you save the whole folders (instead of the individual files), you will have them all neatly sorted and available inside a Category you can pick in the Presets or the Material. No more need to scroll endlessly, especially if you have lots of those in your resources.

Although they are not in .asl format, Photoshop users can easily convert the patterns which are simply in jpg format.

You can get this set of 9 patterns and presets in my store: Creation Cassel.

If you want a chance to get this set for free, hop over to the Happy Place in this thread and tell me what else than writing on, would you use lined papers in a layout. I will pick a winner on Monday night.

cass-LinedPaper-Sample This week, as a sample for this product, i am offering you one tile with one preset (for PSP) and one full size page for everyone else (of course, PSP users can still use it). Do you remember that time when dark papers were popular and kids would use gel pens in neon colors to write on them? Now you can do the same. The tile and the presets work exactly as the lined paper tiles above.

Jennifer had fun playing with this paper sample and added some doodling.

If you are curious to know how the ripped edge was made, i can tell you my secret: it is a font. I used the RippedEdge font that you can use to create any paper edge that will look ripped from a spiral binding, whether it is from the top or the side. You can find that font in my store HERE.

Do you want to do the same? Simply click on the preview to start downloading the tile, the preset and the full page.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

Did you miss my post last week? Probably, because i skipped last week. Why? Because i felt bad not to have a freebie for you to download. Last week, i released a tool-script that will open, duplicate, save the duplicate with a new name (adding –copy to its name) and closing the original. All that, so that the Auto-save function can actually save your work and spare your original from accidental auto-save. It is still available in the store and it is FREE.

Of course, you can do the same steps manually, but you want to do something else than those tedious technical tasks, don’t you? In addition, if you bind the script and add the icon on your menu bar, you can get the whole process in ONE click. That beats doing it manually doesn’t it?

New script – Lined Border

January 20, 2021February 8, 2013 by Cassel

A lined border around the edge or slightly inside the edge of an element can add a touch of definition or elegance. It is fairly easy to do manually if you have only one or two to do, but if you are in love with borders, or if you want to create an outline on several elements of your layout or kit, you will want to get this script to speed up the process and let you play around more.

This script for Paintshop Pro allows you to add a variety of outlines, with different thickness, with different spacing from the edge, with sharp or rounded corners, in single and double too.

Each line is added based on the size of the element, so you dont have to calculate anything. But of course, if you need a precise measure, you can always use the custom value.

Even better, if you plan on using this script on a series of elements, like an alpha, or a set of tags, cards, strips, and more, you can edit the script itself and run it while skipping most of the dialogue windows. That makes the whole process so much faster.

Each line is left on a separate layer, so you can play with the end result even more. Add a bevel and shadow and you can turn that outline into icing on a cookie. Change the blend mode and you get a subtle outline on an element. Run the script several times on the same shape with different settings and move the outlines slightly off center for a dynamic look. The sky is the limit.

You can get this script in my store: Creation Cassel.

As usual, there is a random draw in the DST forum where you can add your name, tell me what elements you could use this script with and i will pick a winner on Monday night. Check out this thread now and post. Even if you already bought the script, you can still win! And if you already bought it, tell us how you like it and even better, show us something you did. We always love to see how creatively different people can use the same script.

cass-LinedBorder-samples This script was a suggestion from Kimeric Kreations. Kim often uses borders on her elements. It adds a great finishing touch and sometimes, that border is barely visible, yet it is there! Since she was the one who suggested this script idea, she also was the first one to “play” with it. She ended up creating several fun elements using various options of the script and customized the end result for a great look.

This set of samples includes various elements and trust me, they ALL have a lined border (even the hearts!). All the elements are in PNG format and range in size from 400 pixels (for the heart) to a 3600 pixels wide border.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

Thanks Kim for this great freebie.

(shh… this freebie will match a future kit from Kimeric Kreations. Keep an eye on her store in the next weeks).

new script – Paper Cutout 2

September 1, 2018February 1, 2013 by Cassel

When i was a kid, i used to take papers of different size and fold them to then cut out along the folds. I was making “snowflakes”, even though they were usually not folded in 6. We had that activity in arts and crafts class pretty well every year. I learned that regular writing papers were not square so i always had to cut off a piece to make my craft (what a waste).

Whether you want to use lined paper to simulate those school projects (not done in art classes) or really plain colored construction papers, or using a patterned paper from a kit, there is no limit.

Start with any paper, and run the script It will take care of the not-so-square papers, it will fold it (or pretend) according to what you ask, and you will have the chance to cut out any design you want, with any tool you like. Use the eraser tool or the selection tool. That is up to you.

Cut sections along the “folds” or the outer edge, or snip the center (you surely did that when you made your “snowflakes”). Once you are done, the script will unfold your piece and reveal the whole design (you might be surprised too). And furthermore, it will add creases to your masterpiece exactly where it WAS folded for a more realistic look. The creases are on a separate layer so you can tweak their opacity depending on the color or pattern of your paper.

You can get this script in my store: Creation Cassel.

cass-PaperCutout2-sample And if you want a chance to win it, check out this thread, and tell me what theme would work well with this script. I will be back on Monday to announce a winner.

I used a couple of “school” papers to cut some more “snowflakes”. But in fact, they dont look like snowflakes at all. If you are crafty, you can surely create some very intricate designs and turn those “snowflakes” into doilies! These two elements are about 900 pixels wide in png format. They don’t match only “kid” kits!

You need to be logged in to download this sample. You can either login, or register on the top of this page.

News from the Campus

We had the draw on Sunday night for a free registration to LOAD213. Andrea was our winner, and she already started her month-long challenge. She said she loved the idea of a challenge as it will give her a little more incentive to scrap. Even more, i asked her to keep us updated on her activities and she already did her first layout, and we are the first of the month! I guess she is right on track!

Did you register for LOAD213? How are you doing with it?

Photo-Graphic with PSP

We will have our monthly live presentation on Sunday (it should be right before the SuperBowl for those of you who are fans). There is still time to register. We will look at how we can turn a regular photo into something else: a watercolor piece, a cartoon, a sketch, and maybe more (time permitting).

Sunday, Feb 3rd, at 5pm Eastern Time zone.

New script – Sprayed

January 20, 2021January 25, 2013 by Cassel

Did you ever use fake snow in the windows to create snowflake or other Christmas decorations? With this script, you will be able to create more than designs with fake snow in a can! Use any shape or even text and have that design either sprayed inside or outside.

You can use this script to create a discrete name, or a date. Make a frame, or a journaling spot. Use a single color or a gradient for a stunning effect. Use the initial shape back with the sprayed design for something even more original.

You can get this script in my store, at Creation Cassel.

If you want a chance to win this script, check out this thread in the DST forum and add your name AND a specific use you can think of for this script. Be creative. I am sure you can use this in many original ways!

cass-Sprayed-Sampler Since we are close the February, the month when lots of people will either celebrate Valentine Day, or simply take pictures or make layouts about their loved ones, I created these three elements that are love related. They are in PNG format, so just about anyone can use them.

In these elements, you can see how the initial shape (although they were filled), were used to get only a thin outline to be combined with the sprayed area.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

New Script – Multiple Dots

August 4, 2018January 18, 2013 by Cassel

Do you like polkadot patterns, but want to have something more than the single dot? Here is a script that will give you the option to create layered concentric dots in random colors picked from the palette you chose.

You can create a singe dot pattern (with two colors), or a 2 x 2 design where all four dots are using the same colors, or a 2 x 2 design where all the dots are randomly colored. The end result is obviously seamless so you can use the tiles as a pattern in your Paintshop Pro. Use them straight or at a 45 degree angle for a different look.

Each tile ends up with all the dots on separate unmerged layers, so you can also replace one dot by something else, or add a shadow, or a texture to each layer independently.

Use bold or subtle colors to match your kit or your photo. Add an extra design in the middle of the smaller dots.

You can get this script in my store, at Creation Cassel. It is on sale at 25% off until MONDAY NIGHT (this is in response to those who mentioned that due to the time zones, they tend to miss the sale price when it ended on Sunday night while the newsletter was released on Sunday morning).

As usual, there is also a random draw in the forum where you can win this script. Check out this thread, and just add a comment to the thread (i am not asking much this time). I will be back on Monday night with the name of a winner.

This week, I didn’t create a freebie for you, but someone else did. I asked Bernadette to test run this script and she got inspired in using this script in a totally different way that i expected! She used it to create a paper; that is the typical use for it, but she also used the dots separately and made a wordart, and some elements too. You can download her freebie mini-kit by clicking on the preview.

Thanks Bernadette.

If you want to look at a matching kit, she has it in her store here.

News in the Campus

Are you familiar with LOAD (Layout A Day)? If you ever participated in the past, you will want to register again, right? If you never participated, it is a great time to start.

scraphappier

The the inspiration and nudge to complete one layout a day for the whole month of February (it only has 28 days!). Whether you are a traditional paper scrapper, or a digital scrapper, you can join in the fun and with the title of SCRAPHAPPIER, what else than fun can you expect?

There is a little contest on the Campus where you can WIN your registration: either you win a registration or you win a refund of your registration if you already paid for it. Since the places are limited and the number of seats is quickly dwindling, you might want to secure yours now.

If you want to register now, go for it: REGISTER NOW.

Then, head over to the Campus and add a comment to the LOAD post. If you participated in previous LOAD events, tell us what you liked about it. If you never participated, tell us why you would like to join. I will draw for a winner on January 27th, 2013. Tell your friends too!

ENTER THE DRAW