Web
Analytics

New script – Page Maker – Photo

cass-PageMaker-PhotoWhen you have a whole album, how many photos would you need? If you want to use layered templates to complete your project faster, you still might have to add dozens of photos. How long would it take you to open each of those photos, copy them, paste them on the template, in the correct layer, resize them, center them in the correct location, crop or trim them and save the layout when all the images are added? Just listing those steps in here, i am out of breath!

Now, imagine that you have 200 vacation photos that you want to place into 25 pages from layered templates. How long will it take you? Would you like it if most of the tedious tasks were done for you, leaving you only the tweaking to do?

This script will do just that. Layered templates are meant to save you time as they are great starting points, but this script will make it even more of a time saver by placing those photos FOR YOU, while you can do something else. You don't even need to be beside the computer once you completed the first few steps.

Michele tested this script and let the script work for almost 3 hours on its own. Yes, totally on its own (unsupervised) and it placed over 1400 photos in 49 templates she had. No stopping and starting and stopping again. Even if she took ONE minute per photo (which would be quite fast), it would have taken her 20 hours!!!

Grab this time saving script today: Page Maker (Photo)

Do you want a chance to win this script? In the comments below, tell me how many photos you would average in a full scrapbook album. I'll pick a winner at random and announce it in the newsletter, next week. Not a subscriber yet? Not a problem. You can register here and it is free (and you only get one email per week).

cass-StripCluster-02As a little sampler today, I created a couple of strip clusters using the Strip Cluster script. I used Southern Creek Design's kit, Spring Thing for that.

When running the script, I created 5 or 6 clusters and picked my two favorite. I tweaked them a little, added shadows (including one for the curled ribbon).

I think it has some really fresh colors. What do you think?

You need to be logged in to download this sample. You can either login, or register on the top of this page.

New script – Add Borders

Add borders script for Paintshop ProSometimes, you might want to add identical borders to the photos on your layout, but since you want the photos to be of different sizes. How do you do that? Adding the borders before placing the photos on the montage is not the solution since you will resize the photos, and therefore, the border will also be resized.

Do you think you can select the photo and expand the selection? Unfortunately, that will create rounded corners. If that is what you want, go for it. But if you intend to have square corners on your photos, you need this script.

You can choose any color for the border, any size (up to 100 pixels) and you can also have the edges straight or irregular.

Grab this script in the store: Add Borders.

When you add a border on a photo, what would likely be the color? Tell me in the comments below for a chance to win this script. I'll pick a winner next week to be announced in the newsletter. Not a subscriber yet? Not a problem. You can register here and it is free (and you only get one email per week).

cass-AddBorders-Template-01As a way to show you how this script can create identical borders even on photos of different sizes, I created this layered template for you. I had to tweak the end result since the script would merge the edge to the photo.

This is a full size layered template in PSD format.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

 

 

 

 

 

And here is the simple layout i made using this template:

ParkPlay-600

What will you make?

 

 

News from the Campus

.
TemplateTemptation-400-replay
Did you attend the live presentation last week but felt you needed to see it again?

Did you try to attend but came in late?

Did you want to attend but had other things preventing you from joining?

Well, you are in luck. This live presentation will be repeated. Not a recording! It will be another LIVE presentation.

It will be showing the same techniques, but using a different template, different photos, and a different kit.

Join us again. REGISTER NOW.

New script – Brick Wall

Brick wall script for Paintshop ProYou might be able to use a photo of a brick wall as a paper background for your project, but you might wish to have something that would match more closely your favorite color, or color palette.

No need to colorize those bricks individually. This script will create a simple brick wall pattern with the brick colors matching your palette, despite still offering variations like normal walls would.

You can have a monochrome wall that will have bricks ranging from your selected color to white. You can choose two colors and the bricks will range between those two. Or you can  have a wilder pattern with multicolored bricks, although they would still slightly revolve around one color you pick.

Choose to add a brick pattern on your active image or create a brand new one, in the size you want.

Get this script here: Brick Wall

What would you use a brick wall paper for? Give me some suggestions in the comments below, and i'll pick someone to win this script for free. I'll announce the winner in the newsletter, next week. Not a subscriber yet? Not a problem. You can register here and it is free (and you only get one email per week).

Brick wall papers - blueAs a sample, I created 3 full size papers (3600x3600) all based around the same blue color. It gives you a good idea of how flexible this script can be.

You can always modify those papers by "wearing" it down, tearing the edges (or cutting out some bricks).

So what will you do?

You need to be logged in to download this sample. You can either login, or register on the top of this page.

 

 

 

 

 

News from the Campus

TemplateTemptation-400We will have a live presentation on Sunday, August 7, at 5 pm Eastern Time.

We will look at ways to use templates and other tools to create your layouts faster.

Join us. It is FREE.

REGISTER NOW

 

 

 

New script – Clouds

cass-CloudsDid you ever see those movies where someone has a plane write "Will you marry me?" in the sky? That is a cool idea but more expensive than most budget allow!

Or when you were a kid, did you stare at the sky imagining that this cloud looked like a cat, or a fish, or a dragon?

Now, with this script, you can create your own clouds, in any shape you want or to write the message you prefer. It will work better if you are using a fat or bold design.

Use a preset shape of your choice, or a thick brush to hand draw or hand write your message or design.

Get his script to create some fluffy messages: Clouds

Would you like to get this script for free? In the comments below, tell me what shape or word you would pick to create a cloud from. I'll pick a winner and will announce it in the newsletter next week. Not a subscriber yet? Not a problem. You can register here and it is free (and you only get one email per week).

cass-Clouds-digitsFor a sample, I created some hand written digits so you can write a special date in the sky.

Each digit is about 675 pixels high and in png format so you can use it in various graphic program.

I am also including a hyphen and a slash, so you can write a date in various formats.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

 

New script – Baby Block Alpha

Baby Block Alpha script for Paintshop ProYou have certainly seen those wooden blocks young kids have been playing with for decades. You can often see those blocks associated with baby or even pregnancy pictures. Now you can create them yourself to write any name or phrase you want in your baby project.

The fun part is that you are not limited with a basic and common font since you can choose ANY font you want. Although you can really choose any font and create some unique blocks, it will give a better result with simple and bold fonts. In fact, you can also use dingbat fonts for some fun results.

Grab this script in the store: Baby Block Alpha

Do you want a chance to win this script? Tell me what word or phrase you would write with these blocks, in the comments below, and i'll announce a winner in the newsletter next week. Not a subscriber yet? Not a problem. You can register here and it is free (and you only get one email per week).

cass-BabyBlockAlpha-whiteAs a sample of what you can do with this script, here is a full alpha that includes letters, digits and a hyphen. I chose white so it is gender neutral.

Each block is about 500 pixels wide and you can resize it as you wish (or keep them full size).
You need to be logged in to download this sample. You can either login, or register on the top of this page.

New script – Cluster Maker

Cluster Maker script for Paintshop ProA lot of scrapbookers and designers love to create and use clusters, but the task is often daunting because of numerous repetitive tasks that seem to drain their creativity. So, why not have a script to give them a jumpstart?

This script will almost randomly pick elements from a single folder for you. Starting with long elements like ribbons and stitches. Then adding more rectangular or somewhat smaller elements like frames, cards and such. Finally, smaller or more "square" objects, like flowers, buttons and stickers. Once the elements are picked (one by one), the script will randomly resize them slightly to add variety in your cluster, will rotate them also, and place them based on the type of cluster you want to generate.

You can create a central cluster, or a corner cluster (and you can obviously pick which corner too). And in a single run, the script can generate as many clusters as you want.

Obviously, the script cannot SEE the elements and cannot determine if each element will look good in the cluster. That is YOUR job. But you will have a headstart instead of starting from scratch.

Get this time saving script: Cluster Maker.

For a chance to win this script, I will make this a little different. I want you to just tell me if you have purchased (or won) any of the other cluster-type scripts in the store. If so, which one. If not, just say so! I'll pick a winner next week and it will be announced in the newsletter. Not a subscriber yet? Not a problem. You can register here and it is free (and you only get one email per week).

Corner ClusterAs a samplers, this week, I used a kit from Hat of Bunny, Baby Mine. I ran the script to create a corner cluster for the bottom right corner.

Once the script was done, i tweaked the placement of the elements, and removed a few. Initially, i asked the script to have an average number of elements, knowing i would likely have too many so i could remove them. I also added a couple of elements that were ignored by the script, but that i liked (namely the banners and the string).

All the shadows were added to the elements, individually.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

New script – Blurred Fill

cass-BlurredFillYou probably have seen those images where a video has been shot vertically, but it has to fit in a horizontal space, then the extra on each side is a copy of the main image, but blurred and darkened to keep the focus on the main image.

This script will achieve the same effect. You can start with any kind of photo, whether it is square or rectangular, and then, you can "fit it" inside an image that is rectangular or square.

This is a great way to fit your photo into a space that is of different proportions without having to crop the photo.

Use this strategy to fill in a carousel or a slide show. Or use it as a header, or to fill a PowerPoint presentation of some kind. Or just fill part of your scrapbook page.

Get this script in the store: Blurred Fill

What would YOU use this for? Can you see yourself using this in a scrapbook project? what would it be? Tell me in the comments below and i'll pick a winner next week. Not a subscriber yet? Not a problem. You can register here and it is free (and you only get one email per week).

cass-WoodenWindow-Sample1Since this script is about creating a special effect on your own photo, i can't really create a sampler from any photo of mine. Well, I could, but i doubt you would find it very useful, so instead, i created a different sampler based on one that was VERY popular recently: the Wooden Window.

I created two windows in png format: one is using a fine wood while the other is more rustic, with visible nail heads holding the pieces of wood.

Both windows are 3000 pixels wide so you can use them for a scrapbook project, or even size it down too.

Place your favorite photo behind it for a wonderful display.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

 

News from the Campus

RibbonsAndBowsJoin us for our live presentation on Ribbons and Bows, where we will take a look at how to create knots and bows from straight ribbons, using PSP.

It is free, as usual, so join us and tell a friend.

Register

New script – Bow #11

Bow made from straight ribbon - script for Paintshop ProWho can say they have enough bows in their digital stash? Nobody!

When looking for bows to use in your projects, are you stuck with the same design, with the same polkadots or the same stripes? And then, having other ribbon elements that are just not matching?

This script will take any straight ribbon and tie it in a simple bow. You can use any kind of ribbon, opaque or translucent, plain or patterned, striped or polkadot, etc.

And for a unique touch, the loose ends will be randomly cut so you won't get two identical bows, even if you start with the same ribbon.

Get this ribbon script in the store: Bow #11

For a chance to win this script, tell me where you would use bows in a project? This is probably going to be a super easy answer to add to the comments below. I'll pick a winner and announce it in the newsletter next week. Not a subscriber yet? Not a problem. You can register here and it is free (and you only get one email per week).

cass-Bow11-samplesThis coming weekend, it will be July 1st (Canada Day) and July 4th (Independance Day) so i created two basic ribbons with the blue white and red colors and one with red and white. Then, i ran the script for each one. I also used the Knot#7 script to create the additional knot.

Furthermore, i am including the basic ribbons too, so you can use them as is, or with other scripts to create more knots and bows.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

 

 

 

 

News from the Campus

RibbonsAndBows-400Next week, we will have another live presentation in the Campus. Last month, Diana suggested we had a class on making knots and bows with the ribbons, so that is what we will play with. Will you join us?

Register now

New script – Strip Cluster Maker

Strip cluster maker script for Paintshop ProMaking clusters can be a great way to expand a kit you want to sell, or a way to use a kit you just purchased.

Making clusters can be a tedious task however. This script will help you as it will serve as a starting point, in gathering a certain number of long elements (like ribbons, tapes, stitching) and other elements (like flowers, buttons, tags, knots, etc.).

You can generate as many strip clusters as you want, from the elements in a single folder. You can create horizontal strips or vertical ones. Did you know that it is not a good idea to rotate a strip cluster that is already made? The shadows will be showing in the wrong angle, and any light source indication will also be inaccurate, giving an odd looking result in the end. So this script will NOT rotate any element (except the long elements) but will place them in  a vertical arrangement, if that is what you want.

You can also choose to have few elements on the cluster or a fuller arrangement.

Since the script cannot "see" the result, it will not know if it looks good or not. That is YOUR task. But the script will have given you a starting point, from which you can rearrange the elements, add new ones, remove some.

A time saving tool for you: Strip Cluster Maker.

Do you like strip clusters? Did you get the Cluster Template maker #3? Tell me how you use (or would use) strip clusters in your projects. Add your answer in the comments below. I will pick a winner and announce it in the newsletter, next week. Not a subscriber yet? Not a problem. You can register here and it is free (and you only get one email per week).

Strip ClusterThis week, with Heather T's permission, i am giving you the exact strip cluster that I made using this script.

It is 3600x700 pixels in size, in PNG format. It also includes all the shadows for realism (including the lifted thread on the left).

You need to be logged in to download this sample. You can either login, or register on the top of this page.

 

New script – Wax Alpha

Wax alpha script for Paintshop ProIf you want to add a touch of elegance or a formal look to a project, you might be looking for a wax seal. However, what you will find is often a set of ready-made seals that will not have the color you are looking for, or the font you wish it had. Or, you might find seal templates that will give an identical shape to all the seals you would create from them.

This script will do just what you need: you can pick the color that perfectly matches the color palette you are using; you can choose any letter, digit, punctuation marks you want (or generate a blank seal to add other designs); you can even choose any font you want, whether it is a simple Arial font, or something more elegant or formal.

Get this script in the store: Wax Alpha

Would you want to get this script for free? Tell me, in the comments below, if you ever used a digital wax seal in any project? If so, how did you create them? I'll pick a winner to be announced in the newsletter, next week. Not a subscriber yet? Not a problem. You can register here and it is free (and you only get one email per week).

Wax seal alphabetDo you want to add some wax titles to your projects? You can use this complete alphabet made of blue wax.

This alphabet includes all 26 letters, 10 digits (for dates or age), a hyphen and a blank seal.

Each seal is about 450 pixels wide and you can resize them as needed.

Add a ribbon underneath, or place the seal on the edge of a paper element to act as a fastener for another use of them.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

 

 

News from the Campus

MadeWithRibbons-400Did you register for our live presentation scheduled for this coming Sunday, June 5th?
Come and see various ways you can use ribbons in a project, whether you created the ribbons, or downloaded them from the net.

Register