Freebies | Creation Cassel

Alpha-Tokens digits

January 19, 2021June 7, 2014 by Cassel

Everyone loves numbers. You can obviously use digits to write a date, you can use it to identify an anniversary or a birthday. You can use it to make a list of the 10 things you like or the 5 places you want to visit. You can use them to count elements or people in a particular photo or at a particular event.

Using the Alpha-Tokens script, i created this set of digits (with a few useful symbols if you want to write a date).

I used the font called Curlz MT. It is a fun and curly font and a wooden base.

Each token is 600 pixels in size so you can size it down if you need to.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

In this example, i created a little eyelet with the vector tool, in white and then, applied a Super Blade Pro gold effect. I made a hole in the tokens themselves too. The string was done with using a Twisted Rope tube on a vector path with the Vector Tube script. Then, in order to “thread” the rope in and out of the eyelet, i used the simple interlacing technique illustrated in this tutorial.

Time to sign up if you haven’t yet.

Twisted Text – Sampler

January 19, 2021June 1, 2014 by Cassel

cass-TwistedText-Numbers

Using a kid like font and three primary colors, i created this fun series of digits using the Twisted Text script.

This series is about 900 pixels long, so you can repeat it over and over again around a photo or a layout for a kid related theme layout or even a school themed layout.

Each digit is well separated so you can also cut some out and use the individual digits separately if you prefer. Why not?

You need to be logged in to download this sample. You can either login, or register on the top of this page.

Do you like this strip of digits? There are two more strips with alphabets (lowercase and uppercase) in the newsletter.

Register for the newsletter now, so you don’t miss them.

Multi-Photo Frame – Sampler

January 19, 2021May 24, 2014 by Cassel

cass-MultiPhotoFrame-3x1

What would you do with a multi-photo frame? Here is one such frame created with the Multi-Photo Frame PSP script. Each photo placeholder is 600x800 pixels, which would match a 3x4 inch photo (just resized).

All the layers are left unmerged (including the shadows), so if you prefer to combine two adjacent photos into a larger one, you can do it on another layer, and remove the initial two.

How about removing the middle placeholder and have the photo under the white mat? Yes, you can do it as there is a hole hidden under that placeholder, complete with its shadow too!

This frame is in PSD format, so even non-PSP users can play with it.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

(if the link is not active, just login or register on the top of the page).

What will you do with this? Show us. You can either post in the comments below, or on the FB page HERE, or pin on our Pinterest PSP Scrapbook Pages board.

(if you don’t have “permission” to pin on that board, just ask for an invite)

New script – Worn overlay

January 19, 2021May 16, 2014 by Cassel

I have looked through my stash of overlays and although i have a pretty good number of them, i always feel like i don’t have the one i want. I have lots of standard size and shape ones, but they are a bit awkward to use on a different shape element, especially if the edges are worn too.

So this script for Paintshop Pro was created. It will use any shape you have, any size. This means that you can have a photo in an odd format, you can have a frame, you can even have individual letters for an alpha and the script will create something exactly for that shape.

And with the random feature, every run will give you something different, even for the same starting element. Isn’t that fun? That means that if the script gives you a particular overlay and you don’t like it, simply undo it, and run it again, and you will get something else. Repeat until you have something you like. It is so fast, that you can run the script 10 times in the time it would take you to create a single overlay, manually.

Grab this script in my store: Worn Overlay script.

See a couple of examples of other results, one with a photo and one with a simple arrow to be use in a project.

Let’s have a closer look at what this script can create. I started with a simple tag shape, in grey. I left it in vector format as the script knows what to do with it (meaning, if it is a vector, it converts it to a raster to continue). I ran the script 4 times on the same image. Since the image was less than 1000x1000 pixels, it worked on a resized version of the image (because the effect, done on a smaller image is not as good). However, the script is smart enough to resize the overlay once it is created so it will match the starting element.

On 3 runs, i asked to have an obviously worn border, so you can see the white edge. On the last run, i chose not to have an obvious border. It still adds a faint edge in some spots, but it is definitely not as obvious as the other three!

All four overlays AND the base tags are included in the zip file, so you can use the tag shape as a template and just layer the overlay. Then, it is up to you how you want to “merge” them. Depending on the color or pattern of the tag, you can darken the overlays and make them black, or you can use a blend mode. Also, since they all fit on the same shape, you can even layer more than one overlay for an even more tattered look!

You need to be logged in to download this sample. You can either login, or register on the top of this page.

(if the link is not active, just login or register on the top of the page).

The download link will only be available for a limited time.

New script – Engraved Rocks

April 17, 2021April 18, 2014 by Cassel

Whether you want to add a date, a name, an event or simply an inspirational quote, this script will help you create these elements in just a few seconds.

You can start with any single word, phrase, number or even a design and the script will create a rock based on the size of that text (or design). You can use any size you want and the end result will be about one an a half time the width of the text. Beware that very large image will be slower to create.

Since the script will create a DIFFERENT rock every time, maybe you have some preferences for lighter rocks or darker ones, or specific shapes might look better. Ask the script to create more than one (you can ask for as many as 20) and you can pick and choose which one you want to keep.

As a bonus, for each engraved rock the script creates, it will also generate a blank version of it. This will allow you to possibly “paint” something else on the rock or just have a blank one for another project.

Grab this inspirational script of Engraved Rocks in the store.

Do you want a chance to win this script? Head over to the Happy Place and tell me of one word you would like to see in a rock that you would use. Next week, i will draw for a winner, but not only that, EVERYONE who will post with their one word, will get an inspirational rock made with that word. So, you don’t even have to be a Paintshop Pro user to get a rock!

This week, i thought i could do something traditional, yet a little different. I created a series of 3 rocks with some common words “Live”, “Love” and “Laugh”, but i thought of adding a little twist by also creating a “Scrap” rock!

Each rock is around 500-600 pixels wide.

What do you think? This set of rocks will be sent out in the newsletter this weekend. Are you subscribed yet?

If not, subscribe now.

New script – Ribbon Tag Corners

January 19, 2021March 28, 2014 by Cassel

In traditional paper scrapbooking, what would you do with small bits and pieces of ribbons? I am sure you can think of many things you could do. In fact, i saw someone create fun little corners with ribbons and i figured it would be interesting to have a script to randomly select ribbons, cut pieces and a arrange them more or less like a corner and add a fastener.

I know, it is easy to cut two pieces of ribbons, and layer them together. But it is so much more fun to have the option to have 10 of them created in one run, all different and simply pick our favorite.

With this script, you can choose to have as many starting ribbons as you want, and you can create up to 10 corners at once. You also have 3 fastener options: brads, eyelets or staples. For the brads and eyelets, you can choose the color or pattern you want so it is easy to have something that matches the actual ribbons you are using, or you can have a metallic pattern for them too. If you choose staples, there are some staples that come from Rachael’s Scraps, included in the script. Or you can also choose to have no fastener added by the script so you can add your own, like a button, a gem, stitching, or any other element you have in your stash.

You can grab this fun Ribbon Tag Corners script in my store.

You have a chance to win this script for free by adding your name to this thread in the forum. I’ll be back next week with the name of a winner.

cass-RibbonCorner As a sample of what you can do with this script, i have this one. I started with 3 ribbons from Rachael’s and generated 5 corners. I only picked one to work with.

First, i chose the eyelet as a fastener and used a gold pattern instead of a solid color. I think it turned out pretty good.

I added shadows on separate layers for the ribbons and using the Warp Brush, i tweaked the shadows on the ends of the ribbons to give the impression that they were lifted.

For the eyelet, i thought it would be cool to imagine that the ribbons were thick and the eyelet was very tight so i selected a circle almost as large as the eyelet itself, inverted the selection and then, on the top ribbon, i added a wide inner bevel. That is what gives that impression that the ribbon is “indented” by the eyelet. Isn’t that a cool effect?

You need to be logged in to download this sample. You can either login, or register on the top of this page.

New script – Stitched Edges 2

January 19, 2021February 28, 2014 by Cassel

If you love the look of stitching around the edge of elements, letters and shapes, you will LOVE this script. It is using a simple tube to create the stitching, and another tube for the holes.

Using any vector shape, you will just run a free script (that you’ll have to download separately) and follow the steps. The script integrates various options, like the width of the edge, the puffiness, the texture of the element and even the color of the stitching as it will colorize it for you. However, in the end, you will have unmerged layers, so you can tweak the color further, or add other details to the element, like shading, stains, or other printing.

Use preset shapes or draw your own. It is also great to create alpha in a (almost) single operation.

The zip file includes the thread and hole tubes that you can also use separately, in other projects.

You can grab this Stitched Edges 2 script in my store.

If you want a chance to win this script, check out this thread in the Happy Place and tell me what element you can think would really use some stitching around. I’ll be back next week with the name of a winner.

cass-StitchedEdge2-sample-WhiteDigits For this week, i decided to play with the idea of creating a whole alpha in one run with this script. I started with the digits (as there were fewer elements in the end). On a large image, i typed in the digits in white. I had to adjust the kerning to make sure the letters would not touch each other when the edge was added. Then, i ran the script. Everything went smoothly from there. I added the texture that came with the Clothes Label script to give a more “fabric” texture to those puffy digits.

Once the whole set of 10 digits was done, sewn and puffed, i just used the Alpha Sheet Separator script to cut out, and save all the individual files. That took less than one minute!

You need to be logged in to download this sample. You can either login, or register on the top of this page.

With the speed and ease of doing this set of digits, i could not help myself than repeat the process with the full alpha! And you can get it in the newsletter. If you have not yet subscribed, fill out the form on the left.

News from the Campus

This month, the live presentation will be about directional tubes. Do you know about those? Do you know what they are? Did you ever use them? Although you might know that Picture tubes are unique to Paintshop Pro, you will love to learn that the directional tubes are so much more powerful!

Join us this Sunday, March 2nd, at 5pm Eastern Time.

New script – Custom Playing Cards

January 19, 2021February 21, 2014 by Cassel

You can be an Ace, or a King or a Queen all you want with this fun script. Although you could, conceivably have a separate template for all 52 cards of a deck, this script will just do the cards you want without the need to search for the correct template.

You can have four of a kind, or a full house, or a royal flush in hand.

Just pick the value and the suit for the card and the script will create it. Then, open the photo you want to display and the script will take care of resizing it, and will create a mask for you so you can actually SEE what it looks like as you can move, resize or rotate your image in that “space”. If the image is higher than the card, the script will resize it. If your image is in a landscape format, you will get the option to either keep the full height of the image or to use two halves of the central space.

You can get this fun script and create your own Custom Playing Cards in the store.

For a chance to win this script, check outthis thread in the DST forum and add your name to the thread. Also, remember to give me an idea on how you could use this script for something OTHER than a game theme project.

cass-CustomPlayingCard-sample-Aces For this week, i decided to give you a template for 4 aces. I am sure you can enjoy havnig 4 aces up your sleeve, right?

Each card is full size, meaning 900 x 1300 pixels and has a separate layer for the center image. Since it is saved in a PSD format, you don’t have to have Paintshop Pro to use it.

What will you display with those cards? Four loves of your life? Four places you have visited? Four children or siblings? Maybe four seasons of the same location? Or four funny faces you have of yourself (or someone else)?

You can use one card or all four too.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

New script – Custom Directional Tube

January 19, 2021February 14, 2014 by Cassel

Do you know about directional tubes in Paintshop Pro? They are such convenient tools that can work for you in creating unique elements. Unlike “ordinary” tubes, the directional ones will allow you to place a simple tube either following the cursor move, like a line of footsteps, arrows, etc., or in a regular sequence where each individual image would be selected and placed one after the other in the same exact order, to make a repeatable pattern or picked randomly among the numerous images created.

Although it is easy to create your own directional tube, it can be time consuming, especially when you create over 100 images.

This script will do all the tedious work for you, while allowing you much flexibility in the creation of your tube. You can have a series of as few as 9 individual images or as many as 400.

Start with any small image (it would take a lot of resources if you are using a large image to start with, especially if you want a lot of rotated images), answer a few prompts and watch it. You can add an overall bevel or shadow to all the images after they are rotated so it would be all consistent when applied.

You can get this time saving script in my store: Custom Directional Tube.

Do you want to create your own tubes too? Check out the Happy Place thread where you can add your name for a chance to win this script.

cass-CustomDirectionalTube-sample-cards As a sampler, i created some simple journaling cards. I simply used the little footsteps directional tube that i created for the preview above and drew a straight line with it. I could have made a curved line that would have shown the rotated steps, but i really felt it was taking too much space on the cards.

You can use those cards for baby milestones, but also for any new step you might be taking in your life, for documenting personal journeys, places you visited, and more.

Each card is 3x4 inch so they would fit in regular pocket page projects if you want.

They are also large enough for you to cut them into tags if you prefer.

You get 5 basic colors.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

New tubes — Seed Beads 2

January 19, 2021February 7, 2014 by Cassel

This week, i am bringing you some more beads, but this time, they are opaque, and in a softer palette.

You get those bead spills at your fingertip as you can just draw with your mouse and the beads will be spilled along that path. No need to click dozens or hundreds of times to have that many beads on your project.

You get 5 colors: ivory, rose, plum, emerald and aqua. And you get two sets for each: one to spray the beads all around and one to have regular strings of beads. And you also get one set of multicolored bead spray.

Do you want more colors? Keep an eye on the store as more are coming.

You can grab this set of Opaque Seed Beads picture tubes in my store. Sorry PS users, but this is unique to PSP!

cass-SeedBeads2-Sample As a free sample, this week, i decided to use these tubes in a different way than last week.

I opted to create a locket. How did i do it? Simple:

- i created a vector heart shape and used a gold tile as an outline and no fill. That outline was then converted to a raster and added a bevel.

- with a copy of the same vector shape, i set it for a solid fill and no outline. Once i converted it to a raster, i ran the Colored Acrylic script to give that particular “glass” look (even if i used only the plain one without any color).

- on separate layers, i sprayed pink and read seed beads. I reduced the step value so the beads would be closers, and i used several layers of beads so i could add a drop shadow on each layer.

- i deleted any extra bead that ended up outside the locket.

- finally, i added a chain with the Gold Chains directional tube.

You need to be logged in to download this sample. You can either login, or register on the top of this page.