My products | Creation Cassel

New script – Smooth Overlay

January 19, 2021August 8, 2014 by Cassel

Sometimes, you might want to add a little texture to a paper without making it too bold. In those cases, you might want just something to give a slightly variegated look but you don’t want to use the same overlays over and over again.

This script will actually create a brand new overlay for you, in seconds, and it will always be different, from one run to the other. The script will adjust to the size of your paper, so you can work with a small, tagger-size paper, or a full size 3600x3600 pixels paper.

The overlay will be left on a separate layer so you can adjust the opacity or the blend mode (or both) depending on the color of the paper and its pattern, and the overall effect you want to achieve.

You can grab this script FOR FREE, in the store as Smooth Overlay.

This week, there is obviously no need to do a giveaway since the script is already free anyways. Don’t you think?

For a free sample (and this is mostly for our non-PSP-using friends), i made one overlay in PNG format that can be used the way you want: adjust the blend mode, or the opacity. Apply it to a paper, or use part of it to add variations on a ribbon, a tag, a frame, etc.

What else could you use it for?

You need to be logged in to download this sample. You can either login, or register on the top of this page.

New script – Glass Marbles

January 19, 2021August 1, 2014 by Cassel

Marbles are common in games for the young and not so young. Although i never played marbles, as in the formal game, i have played with them as in lining them up, making them roll on various paths, etc.

If you want to create a “digital marble” for a kit, or a layout, where will you find it? And if you find it, will it be the right color for your project?

Maybe you can find a template where you can choose your own colors? That is good for the color, but you will be limited in the design.

This script will ask you to choose between 1 and 6 colors, so you can start with a photo, a paper, or a palette for those chosen colors. From there, it will combine those colors randomly, and create a different swirl for each of them. You will never have two identical marbles, even if you are using the same colors.

Create between 5 and 25 marbles in one run. If some of them don’t look good to you, just discard them.

You can have the script generate the marbles in size ranging from 100 to 300 pixels. And once they are done, you can also size them down if you want to use them as glass pearls.

Grab this script HERE (before you lose your marbles!)

Do you want a chance to win this script? IN THE COMMENTS BELOW, tell me what is your favorite color for marbles. Since this script is so easy to run, i will create marbles for EVERYONE who will post a comment below with their color (whether you are a PSP user or not).

Do you want to know who won the Puzzle script from last week? Check out the newsletter!

Since i didn’t have a way to determine what color would be best for anyone’s project, i decided to create a set of marbles based on basic primary colors: yellow, red and blue. It is interesting to see how those bright and vivid colors are sometimes combined into not-so-flashy swirls, don’t you think?

The set includes 20 marbles, so you have a lot of choices.

Each marble is 300 pixels wide, so they are big enough to be… marbles, but you can also resize them down if you prefer to use them as glass beads, to decorate frames, jewellery, etc. You can also export them as picture tubes if you want a quick way to put them onto a project.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

New script – Puzzle 6×6

January 19, 2021July 25, 2014 by Cassel

Do you like puzzles? Do you dream of turning your favorite photo into a puzzle? You can probably do it with some plugins in PSP but most of them do not allow you to tweak, move, rotate, or remove pieces at will.

This script will do just that. Take a square photo and run the script. You can also use a rectangular image, but obviously, the pieces will be somewhat stretched, but it is a puzzle anyway, so maybe it won’t matter too much!

You can grab this puzzling script here: Puzzle 6x6 script.

And remember that you also have the possibility to get other puzzle scripts.

Puzzle 4x4
Puzzle 4x6
Puzzle 5x5
Puzzle Round

Do you want a chance to win this script? Post a comment in the box below telling me if you ever created a puzzle from a photo and if so, how you did it. I’ll be back next week with the name of a winner.

Do you want to know who won the script from last week? Check the newsletter!

As a little gift this week, i obviously could not create a puzzle for you since you would surely prefer to use your own photo than any of mine. So i decided to give you a little frame made of corner brushes and the Mitered frame script. All the details of how i created it, will be in the newsletter.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

News from the Campus

Did you know that the recording from the last live presentation is up for you to watch for free in the Campus?

Check it out!

And since there was so much stuff to cover, there is a need for a second part on the same topic. It is already scheduled to be on August 3rd, at the same time.

New Script – Camo pattern

January 19, 2021July 11, 2014 by Cassel

Camouflage patterns are not only used for… camouflage anymore. I remember having a nice pink pair of jeans in a camo pattern years ago. Now, you can find those in any color, but what if you want to use or create something with a very specific color palette?

You can surely find templates to add the colors you want, however, those patterns are always going to be the same one you will use. How about getting something totally new and unique?

This script will create a camo pattern based on ANY size image. You can create a small tile, like 200x200 if you want, or work on a full size 3600x3600 paper. Every run of the script will give a different pattern due to the random feature integrated in the code.

Once the basic pattern is created, you get prompted to choose the colors. In all, depending on the random pattern created, you might need to provide between 4 and 9 colors. Traditionally, you should provide colors starting with the darkest one and gradually move toward lighter ones.

You can also choose 2 colors to be use alternatively (like blue and pink and blue and pink). You can choose 2 colors, alternatively, and also change the brightness every time. Or you can go really crazy and use several different colors. Be warned that this will make your head spin, but if that is the look you want, go for it.

Each paper or tile will be KIND OF seamless. This means that it will not be 100% seamless, and if you look closely, you will see some seams, but because of the nature of the random pattern, that seam might not be obvious from a distance in a busy paper. However, it is recommended that you create the pattern on the larger image size, instead of using a repeated pattern.

You can grab this script in the store now: Camo Pattern.

How about a chance to win this script for free? Check out this thread in the DST forum and tell me what color (or colors) you would love to have a camo pattern done in, but cannot find it. I’ll be back next week with the name of a winner.

For this week’s sample, i created a full size 3600x3600 paper in beige tones. I applied a Denim texture to one copy and a Corduroy texture to the other, so you get, in fact, 3 full size papers with the same beige pattern, but different textures.

You can use those as a background paper, or you can cut up sections to use as a frame, a ribbon, an alpha, etc.

What will you do with that?

To get this set of papers, simply click HERE.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

New script – Custom Photo Cards

January 19, 2021July 5, 2014 by Cassel

Our Custom Playing Cards were a real popular script a few months ago and after seeing some flashcards, i figured that it might be interesting to have photo cards with a word or phrase instead of a single card value.

These cards are a little bit more customizable as you can choose to have square or rectangular cards, and you can choose the card color, the text color, the font and obviously the text itself. And finally, as expected, you can have the photo you want too.

What could you do with those cards? I can imagine having school photos of your child, from kindergarten to graduation, with the grade listed on each card. Or how about having one card made for each member of the family? Or why not use those cards for your Project 365 or 52 to add a date on each photo? Or even just a short description.

You can grab this script in the store. It is the Custom Photo Card script.

But you can also get this script for free. Post your name in this thread in the DST Happy Place section for a chance. I’ll be pick a winner next week.

What would you think of having a card for each day of the week? I created these layered template cards with the days of the week. You can use the Speed Scrap Scripts, or the Clip to it to replace the template with your photo. Or you can also do it manually, if you prefer.

If you want this set of cards, just click HERE. (if the link is not active, just login or register on the top of the page)

You need to be logged in to download this sample. You can either login, or register on the top of this page.

What will you do with those cards? Maybe create a 2 page spread to show photos of your week-long vacation? Whatever you do, just post a link to it so we can admire your masterpiece.

New script – Punched Confetti

January 19, 2021June 27, 2014 by Cassel

Did you ever spill all those little pieces of paper from a three-hole puncher? Those nasty little pieces are a dream for kids and crafters. But what about digital artists?

To cut out little circles out of papers can be ok if you are only doing a few, but if you want to recreate the look of a bunch of them randomly spilled (or skilfully arranged!), that will take you forever and a day.

This is a script that will do everything for you and will turn those tiny bits of papers into a tube (check out this article for more information on what can be done with Picture tubes in PSP) . This will then allow you to “spill” those pieces wherever you want, on a project.

You can embellish your pages by adding confetti as an accent in a corner, have some gold and silver confetti for a celebration project, create a border of confetti or add to a flower cluster. You can use a little confetti or a lot.

And this script will not ask you to choose a color; that would be cheating! It will ask you for PAPERS. That is what confetti are from, right? And the pieces will come from randomly selected sections of the papers, they can be rotated and even sized slightly differently if you want (but that is optional). You can work with a single paper, or a series of papers. You can just create a paper with a gradient too, if you want the colors from that gradient (or you can create a gradient from the color palette you are working on).

See other examples of confetti created with a single patterned paper and a gradient paper.

There is so much you could do. Grab this time saving script now: Punched Confetti.

And for a chance to win this script, head over to the DST forum in THIS THREAD and tell me what you would do with those confetti. I’ll be back next week with the name of a winner, which will be announced in the newsletter.

Do you want to see those confetti up close (and personal)?

Here is a set of 3 confetti spills in simple blue, white and red colors. They can be used to embellish a celebration layout (the 4th of July is around the corner and so is the 14th of July). But you can also use them for any other type of layout. Those simple colors can also go very well with a kid themed layout.

They are proportionally spilled based on a 3600x3600 pixels layout, which means that the tallest one is close to the 3600 pixels height.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

What will you do with these? Show us your masterpiece.

Pockets to scrap with – a free sampler

January 19, 2021June 21, 2014 by Cassel

What do you think of Pocket Scrapping? Do you think it is only for “traditional paper scrappers”? How about giving it a try?

Here is a 3000x3000 page, made with 6 individual pockets, and matching card templates.

You can replace any card by a paper (or clip a paper or a photo to it), or remove it and place an element in the pocket instead, or you can remove the plastic layers to create a simple blocking look on your page, with room around it for other details you might want to add.

Interested in giving it a try? This is a PSD layered file so most graphic programs can use it.

You need to be logged in to download this sample. You can either login, or register on the top of this page.

And remember to show us what you make with it.

P.S. this is a BIG file to download.

New script – Pocket Scrap

June 29, 2014June 20, 2014 by Cassel

Pocket scrapping has become popular with tangible paper scrapping as a way to quickly set up a page with pre-cut cards where you could add notes, journaling, titles, and pockets where you could simply insert photos.

Digital scrapping can already be quick (although it could also be slower depending on your style) but the pocket look could be an interesting one for you. If you like that look, you still have to find those digital plastic pockets and overall, the number of different pages is fairly limited, but with this script, you can create a wide variety of pages, with many different number of pockets and also different shape, format and arrangement.

Furthermore, the script will also create card template for each of those pockets, no matter the size or format. How is that for a help to create your own pocket scrapping?

But that is not all. If you like the idea to have nice cards (instead of the basic grey ones), you can open your favorite papers and let the script create cards using random papers of the perfect size and place them in the correct pockets too. And since everything is left on unmerged, you can change any card for a photo, or remove it completely to place your concert ticket instead.

You can get this Pocket Scrap script in the store.

You don’t necessarily have to stick with plastic pocket; use the script to do some color blocking (and tweaking any block to your liking) to add various text and journaling, or replacing any card by photos.

What will you create with this script?

New script – Photo-Masks

June 14, 2014June 13, 2014 by Cassel

A while ago, as i was looking through galleries, i noticed that some scrappers are using masks to add a fun edge around their photos. That gave me the idea to try making a mask for my own photo, but i had a hard time figuring something “different” and i wished i had a way to randomize my effects.

Randomization is a great function that can be coded into scripts, so i thought a script was going to help me. And it did.

This script will use several regular effects in Paintshop Pro and combine them to create unique edges around photo AND has the additional function to create the mask in a black and white image so that the exact same effect could be obtained with another photo if needed.

Initially, this script was only working on a regular full size image, but i know that some interesting masks are not rectangular, but round, elliptic or in any other shape. In addition, the focus is not always in the center so this script allows you to make a selection where you want the focus to be, if it is not in the center.

See other examples of photo edges and matching masks can be generated with this script.

Isn’t that interesting that you will get the mask based on the photo edge instead of the other way around?

Go grab this unique script in the store: Photo-Masks. It will be on sale until Tuesday, June 17th.

Do you want a chance to win this script? Check out this thread in the DST forum and add your name to the thread, while answering the question in the opening post. I’ll be back next week with the name of a winner.

New Script – Alpha-Tokens

June 7, 2014June 6, 2014 by Cassel

Wooden or plastic tokens are a fun variation on tags to place letters or numbers. Having them cut out of the token is another fun change.

Although one can probably easily create a cutout from any shape or material token, it quickly becomes tedious to create several for a whole alphabet or a date with 8 digits.

This PSP Script will let you create a whole alpha, with any font you want, on any type of token you want, round or square, with or without a decorative edge.

You can also create blanks (if you want to add a painted effect) or others with designs on them, like preset shapes or hand drawn ones.

Although you can, in theory, use any font, some of them might not give a great result. This is the case if you have a font that is excessively tall or wide. The script will try to resize the height or the width, but if the other measurement is a lot more important, the resizing will not yield a suitable result.

You can grab this fun script in the store: Alpha-Tokens script.